"Hi! I have two problems since rc2, i think :-(
1) when i raise the trottle stick, nothing happen till 90%. In the logs there is 90% thrIn and about 45% thrOut. Same with pitch and roll for example, the copter starts to do the action when the stick…"

"Hi randy! I got a big problem :-( with 3.3.1 and 3.3.2 rc2 the copter takes off in loiter/althold with about 80% of throttle given by me. In stabilize it takes off with about 45% of throttle. What can that cause and how can i fit it? In the logs i…"

"No, the question is whether the quad takes off at for example 50% Throttle.
Try to go up in stabilize and then, when you are at 5 meters switch to althold. This should work. Furthermore, take a look at the throttle_mid parameter and the tutorial at…"

"Hi! In which flightmode does this problem exist? In Stabilize or in Loiter or other Auto-Modes? Try it.."

"*with about 45%"

"Hi Randy! I think its a big bug... My Quadcopter does take off in stabilize with ca 45%, and in loiter or alt hold with ca 80%. Why?"

"Hi, where can I find the THR_MAX parameter? Because my Quad does not take off, only when i give over 80% throttle. The motors can lift up to 2,3kg per Motor and the Quad wheights circa 2.8kg."

"It is possible to fly a Arducopter-based(Pixhawk, APM etc.) multicopter with an Joystick-Controller like the Xbox-Controller for example. In this case, the data gets transmitted over the 433mhz/915mhz telemetry module like the 3dr remote or clones…"

"Hi Devs! Is it now possible to transfer telemetry data to an graupner HOTT system?"

"I think this is something like a piezo buzzer."

"You can try the DJI E800-Set. This is used at the Inspire 1 too, which is roundabout 3kg heavy."

"Hi, the Channels on my remote were wrong changed."