Gender
Male
About
About Me:
RC fan
Please tell us a bit about your UAV interest
Main interest is autopilot SW
Activity Feed
"Perfect! Except there is no composite video out and this limits video transmission only to digital link :-("
"Really great post"
"Yop, thanks for info."
"Is the driver for LED for sale somewhere or it is just documentation for DIY guys?"
"This is really overwhelming and fascinating. May I ask you what kind of LED module is used on these drones?"
"Nice to have it. Would you post it to ardupilot.org too please."
"Well guys I put together my quad copter and antenna tracker (build 0.8 on pixhawk). Connection via 433mhz telemetry link between vehicle and pixhawk works - I can see in MP telemetry data from vehicle. Anyway I can't switch between data from AT and…"
"One thing wonder about the rear motor seems to be fixed.
All tricopter configurations I have ever seen have rear motor
on servo gimbal to correct yaw efect of rotating propellers.
How did they solve this...."
All tricopter configurations I have ever seen have rear motor
on servo gimbal to correct yaw efect of rotating propellers.
How did they solve this...."
"I'm curious when this configuration will by supported by ArduPlane...."
"I'm trying to build it with PX4 Toolchain but with no success yet.
When I hit "make configure" in PX4 console I get: "make configure is no longer required"
OK, but there is no config.mk created then..
then I hit "make apm1" or "make apm2" and get…"
When I hit "make configure" in PX4 console I get: "make configure is no longer required"
OK, but there is no config.mk created then..
then I hit "make apm1" or "make apm2" and get…"
"Thanks Greg a lot. I really appreciate it.
Anyway I'm going to study how to open cpp project in Arduino, because afaik it only accepts ino or pde files :-)"
Anyway I'm going to study how to open cpp project in Arduino, because afaik it only accepts ino or pde files :-)"
"It didn't load pictures with error messages from MP. Anyway the texts are :
The hex file did no contain an end flag. aborting
next dialog is:
Failed to read firmware.hex:No end flag in file
and last :
Error uploading firmware
:-(
If anybody here has…"
The hex file did no contain an end flag. aborting
next dialog is:
Failed to read firmware.hex:No end flag in file
and last :
Error uploading firmware
:-(
If anybody here has…"
"Please help,
I was trying to upload FW 0.8.0 in MP but without success. When I hit "Load custtom firmware", first option which contains also AT 0.8.0, downloading start but after a while I get error message:
Seems to me like the file is not…"
I was trying to upload FW 0.8.0 in MP but without success. When I hit "Load custtom firmware", first option which contains also AT 0.8.0, downloading start but after a while I get error message:
Seems to me like the file is not…"
"Yep,
thats it I didn't look at the whole line in the drop down menu just at first few letters :-/. My fault.
Anyway is there possibility how to store it on my local hard drive? I mean I would like to back it up, just in case in next releases of…"
thats it I didn't look at the whole line in the drop down menu just at first few letters :-/. My fault.
Anyway is there possibility how to store it on my local hard drive? I mean I would like to back it up, just in case in next releases of…"
"Greg,
Using latest version of MissionPlanner I can't find this FW 0.8.0 in combobox when clicking on "Pick prev firmware" button.
The only AT FW I can see here is 0.7.6 and 0.7.3. Can you please send me hex file with AT 0.8.0?
Greg Covey said:…"
Using latest version of MissionPlanner I can't find this FW 0.8.0 in combobox when clicking on "Pick prev firmware" button.
The only AT FW I can see here is 0.7.6 and 0.7.3. Can you please send me hex file with AT 0.8.0?
Greg Covey said:…"
"Is there a need to change something in code, if I want to use it with my APM 1.4, or can I directly compile and flash it into AMP ?"
