About

Gender

Male


Location

Zhigulevsk


Please tell us a bit about your UAV interest

The theme is very interesting. Interesting flying in manual and automatic modes. Later still want to try FPV.


Hometown:

Zhigulevsk


Activity Feed

raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello. Today i test 3.1-rc5 on my quad X. 450 Size, 1000kv motors.
Autotune very good. More stability on fast land and more stability with sticks drop.

I have some questions:
1) What indicates YELLOW led in APM 2.5 (near blue GPS and red)?
2) I try…"
Oct 28, 2013
raefa replied to raefa's discussion MP 1.2.83 logs
"Andhow i may see FW and frame type (quad or hexa) in MP log?"
Oct 22, 2013
raefa posted a discussion
Please give detailed information about new logs sorting.I see folders: GENERIC, QUADCOPTER and root.In root i see with randomly date, in other i see quad and hexa logs also randomly.
Oct 22, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello! I build Hexa X.
Now i see problem in mission same as: http://diydrones.com/xn/detail/705844:Comment:1330767
(small time for turn more) But now RTL_LOIT_TIME is 5000. I try RTL_LOIT_TIME = 5000 and no result.
Or problem with TX (failsafe from…"
Oct 12, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello!
Today i fly with my new Hexa X.
Now i see problem in mission same as: http://diydrones.com/xn/detail/705844:Comment:1330767
(small time for turn more) But now RTL_LOIT_TIME is 5000.
Than is this??? Please see my log and help.2013-10-08…"
Oct 8, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello all!
Now i have second Hexa X copter with APM 2.5.
Today i have second fly. First i fly and land, then i check how works RTL. All good. And then i testing Failsafe - power off TX. But copter not fly RTL. It slowly fly down how before this…"
Oct 6, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Sorry if I repeat the question. I have the problem when the mode GeoFence. The parameters of 100m radius and height of 100 meters. Checkbox is enabled in the settings. At initial power-up and switch off Fenceoption on TX, Fence work restrictions and…"
Aug 28, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello all! I have problem with my copter. Today very strange fly. I think what problem with my RX (Turnigy 9x).

Of all the changes were significant only soldering wire receiver antenna. Before that was visually damaged shell wires near the box of…"
Aug 27, 2013
raefa replied to Christiaan van Vollenstee's discussion Mission planner Crash after update
"I have problem too. Win7 Pro 32bit SP1, WinXP Pro 32bit SP3."
Aug 18, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Today i try Land mode from Tx. First i set Land button in MP and save this, then takeof in Stable and press Land button. I see strange behaviour and shaking. It is repeated every few seconds. Then i try different sequences in Stable, Loiter, Land…"
Aug 3, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello all. I have problems with 3.0.1 (MP current FW for quad) three days. Loiter very bad.
The unit began circling clockwise (as viewed from the bottom) with increasing radius. Waited 5 meters and corrected position, and then circling again.…"
Jul 28, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"My today fly.
I have new problem.
Circle radius 10m.
I try change Loiter PID P to 0.2.
I circle mode i see strange behaviour. Copter start fly circle and then slowly drift and fly in random position with random Yaw.
At 63% of log i change Loiter PID…"
Jul 16, 2013
raefa replied to raefa's discussion MP 1.2.53 (or before) -1.2.60 set WP trouble.
"At which point I can not move home? What do you mean?"
Jul 15, 2013
raefa posted a discussion
I usually make a mission with takeoff, flight of waypoints and RTL.I set Takeoff, select altitude, and after it i not may set waypoint. I click mouse in map and waypoint not set. Then i click in map and goes bug: mouse captures Home point and…
Jul 14, 2013
raefa replied to Randy's discussion ArduCopter-3.0.1 released!
"Hello everyone! Sorry my english.Most of the work is done in 3.0.1!If something has changed in the behavior of RTL in the mission compared to 2.9.1b?I usually make a mission with Takeoff, then fly to waypoints and RTL on last waypoint. Previously,…"
Jul 13, 2013