Hi,I have a Turnigy Talon tricopter. When arming, the servo goes full to the maximum rotation it can,Is there a way to limit the servo movement? (the same as changing what is usually called "limit" in a standard TX). I found some old theards, but…
"Ok. I spent some time searching this forum but I did not really read the product page on the 3DR store. And it says:
"Interface to the module is via standard 5V-tolerant TTL serial / FTDI USB serial."
So why is a 3.3v cable sold with the module.…"
Hi,I can see that 3DR sells 3.3v FTDI cables. But I was not able to confirm by searching this forum if 3.3v is the only option or if a cable with TTL level of 5v will also work ?I already have a 5V cable and I just don't want to try it and fry my…
"Same "issue" here. I have a rctimer board that I just received. This is my first board and I've never flown an ardupilot.
When running arduplane 2.68, the horizon jumps all around as soon as the GPS has a fix. If I disconnect the GPS, the horizon is…"