Gender
Male
About
Location
Zurich
Please tell us a bit about your UAV interest
Taking over the World, One Droid at a time.
Hometown:
Zurich
Activity Feed
"Well looks like the solution is to calibrate, calibrate again and then calibrate some more."
Hi all,I cannot seem to be able to get my motors to start in sync. I have carried out ESC calibration multiple times now, during sync process motors start in sync and everything seems fine. However, after running all-motors sync, I reconnect battery…
"Well motors are now starting, re-ran all the calibrations and they now work. Hurray! Thanks for all your input!
I have a separate problem now which is the motors do not start in-sync even though they have been calibrated, that is another topic."
I have a separate problem now which is the motors do not start in-sync even though they have been calibrated, that is another topic."
"Hi there, well I managed to get motors turning, yippee!! The problem seemed to be that ESC calibration had not been done (did not know it was a pre-requisite). All good you say.. . well now I can get the motors spinning when connected via USB but…"
"+1 simply ridiculous, please find a solution"
"+1 on this, nothing in3dr store yet"
Hi All,My first post here as I intend to move away from Naza V2 to Pixhawk.After 'working the problems', I managed to get a green light on the Pixhawk (yippeee!) but I cannot seem to start the motors.I connected the Pixhawk to APM Planner >…
