Gender
Male
About
Location
Saint-Gratien
About Me:
Arducopter hexa in the box ^^
Please tell us a bit about your UAV interest
I have 2 quad and now i want to build a jdrones hexacopter
Hometown:
Saint-Gratien
Activity Feed
"Perfect. Thank you very much ;-)"
"oups , i used 5v instead of signal. I change and test."
"Hello guys,
I have connected 2 leds for arm and gps.
I write 3 on the parameter but my led are always solid light. They never flash.
I am in v.3.0.0. Do you know why ?
thank you by advance"
I have connected 2 leds for arm and gps.
I write 3 on the parameter but my led are always solid light. They never flash.
I am in v.3.0.0. Do you know why ?
thank you by advance"
"I'd like to thanks all the development team of arducopter.
Version 3.0 is great and i am really happy to use it in my neo/nexaircraft.
Here's a video :
http://youtu.be/eKo25-n_aM8
Today , i have tested loiter and rth and it's diabolic ^^"
Version 3.0 is great and i am really happy to use it in my neo/nexaircraft.
Here's a video :
http://youtu.be/eKo25-n_aM8
Today , i have tested loiter and rth and it's diabolic ^^"
"hi,
How to program simple mode in a different switch ?"
How to program simple mode in a different switch ?"
"Maybe a small issue:
I launch the application, waiting for a fix.
When fix is ok, map is not refresh. I quit application, launch again and map appears.
Tomorrow, i will do my first flight with my hexa. Not sure to test GPS and Andropilot."
I launch the application, waiting for a fix.
When fix is ok, map is not refresh. I quit application, launch again and map appears.
Tomorrow, i will do my first flight with my hexa. Not sure to test GPS and Andropilot."
"Hello,
does it work with APM1 ?"
does it work with APM1 ?"
"Hello,
I am happy to see this new project.
I'd like to connect my 3DR radio telemetry directly in my Samsung Galaxy S3.
I'm sure it works because some people test it.
They are using FTDI 232 driver.
I found this on the net :…"
I am happy to see this new project.
I'd like to connect my 3DR radio telemetry directly in my Samsung Galaxy S3.
I'm sure it works because some people test it.
They are using FTDI 232 driver.
I found this on the net :…"
The 2 modules was working in 3DR config but could'nt connect in mission planner.I tried several things and , at a moment, could'nt read anymore air module config.I tried firmware update but only ground module update in 1.6.As i can't read anymore…
"THis link doesn't work. need to be login in this forum
Eric"
Eric"
