APM2 with externally mounted magnetometer. It is plugged into a 4-pin header soldered to the I2C contacts next to the 4-pin I2C connector.
You need to be a member of diydrones to add comments!
APM2 with externally mounted magnetometer. It is plugged into a 4-pin header soldered to the I2C contacts next to the 4-pin I2C connector.
You need to be a member of diydrones to add comments!
Comments
Over at store.diydrones.com. If go this route, don't forget to get the header pins and the cable too.
My internal mag stopped working when I damaged some contacts. There are some posts here about disabling the internal mag the right way, if needed.
Where did you get this one ?