Setup:Pixhawk 2.4 with ArduCopter 3.1.2Frame: 3DR Y6 with new black 850 KV motors, 3DR ESCs SimonK, 3DR PowerModule, 3DR Radio 433 MHzPower supply: Manson HCS-3602 set to 12VRadio: FrSky Taranis…Continue
I am interested. As we have carrier NAT in Germany, all mobile devices have private IPs and cannot offer services directly. We need a facilitator to connect two mobile devices.
Maybe you can setup the facilitator/mediator service with…"
"They're just two projects that started independently long ago and have been gradually converging under Dronecode. They use the same RTOS and many of the same libraries below the flight stack, and the same ground stations above the flight stack.…"
Hi,I like to thank all developers for their tremendous work giving me and all the other users so many opportunities and fun with ArduCopter, Plane, Rover and PX4.Now I have two questions I could not answer myself although following this forum quite a while...1. What are the differences between the software PX4-flightstack and ArduCopter?I know PX4 refers to three terms:- the hardware (Pixhawk, PixRacer etc.)- the full stack which can be used as Flight Controller and autopilot with…See More
what are the specs of your solution?
Will it be open-source or commercial?
I have a Skywalker X8 Wing with a raspberry pi onboard and would love to make telemetry, potentially FPV and download of pics available over cellular network.
"If you grab the pic from camera to raspberry pi, you could geotag it on the RPi which might also run MavLinkProxy. Add to the cam trigger event a saveaction of last seen gps coordinates from Mavlink.
You can send the geotagged picture asynchronous…"
I send a link to this post to "medicines sans frontiers". Maby they can support with the legal topics in Turkey, provide the medicines to be carried and get their doctors on-site collecting/using dropped medicines.
All the best…"
"I would appreciate your option for mobile networks (3G,4G,LTE) and opening the link for Mavlink.
With that solution you cound reuse the APM gimbal control and override for headtracking over Mavlink and integrate the video into Mission Planner…"
are you really having a 2013 Y6 in motor configuration A (Y6A)?
In 2013 they changed motor spin direction with configuration A to configuration B.
Configuration B is the default for Y6 in Mission Planner and Apm Planner.
I have similar issue and also posted to Github but did not got an answer or yet:
My Pixhawk enters calibration mode, calibrated SOME ESCs, but not all.
With next restart, some ESCs are…"
The rubbish are mavlink packages (binary) you are trying to read with a terminal.
To go to command line mode (cli) you have to reboot and to connect to cli within first 15 seconds. As some as you see normal text hit three time return to…"
Setup:Pixhawk 2.4 with ArduCopter 3.1.2Frame: 3DR Y6 with new black 850 KV motors, 3DR ESCs SimonK, 3DR PowerModule, 3DR Radio 433 MHzPower supply: Manson HCS-3602 set to 12VRadio: FrSky Taranis with X8R connected using SBUSHello, I put my copter on a table in a heated room with closed windows. The copter had physical connection to power supply only. Notebook used 3DR radio to connect.I noticed strange measurements.- altitude is changing all time (copter was standing on the table without…See More