I have a strange situation where the whole system work fine when I first connect the power. But after a few minutes, the receiver suddenly stop working, do not react to transmitter input and the LCD…Continue
Today I am flying a mapping mission. Plane take off and circle in home location in RTL mode while climb for altitude. ( I set the RTL altitude @ 350 M ) when it reach about 200 meter I put it to…Continue
I re post my question here hoping someone will lend me a hand.I am running APM 2.73 with RDF900 with default radio setting. I can not send any command from flight data tab, eg : change altitude,…Continue
Until now, the only way to connect APM or Pixhawk via wireless is using radio modem. Well, you can also use blue tooth but the range is very limited. It may be good for set up or so but certainly not flying if you wish to view live data.
For long range FPV or aerial mapping mission, I use RFD 900 radio…Continue
I have been using Canon S100 GPS for most of my aerial mapping work. It has been good to me as I do not require very high accuracy of the GPS location. My experience tell me that even with the small on board GPS receiver in the camera, my accuracy is always within 3 to 8 meter. Recently there are some request where very high resolution imagery is required and I start…Continue
Introducing the new 100 KM long range Mapping / Video conservationdrones base on Skywalker air frame. With the new power system, the flight duration is more than 3 hours and range over 120 KM with 200 grams payload, typical weight for point and shoot camera such as Canon S 100 GPS on board. The all up weight of the drone is 2.9 KG ready to fly.…