2 Hour flight time Hybrid quadcopter, for 2500€

We are now sizing our medium aerial platform down, to get a cheaper product with an awesome flight autonomy.

It can be equipped with both DJI N3 or Pixhawk flight controller.

16" props are used for this smaller quadcopter.

To pre-order one and get it in 60 days click here https://www.sandwichdrones.it/collections/frontpage/products/hy500-...

Views: 2065

Comment by Charles Blouin on July 30, 2018 at 7:43am

Great autonomy!

Comment by Daniel Perez on August 1, 2018 at 8:01am

Thats very interesting, whats the payload beside fuel tank an batteries,  can it hold a 3.5kg lidar? and what time would be expected?


Comment by Nicolai Valenti on August 1, 2018 at 10:19am

Hi, mounting on it a 3.5 kg Lidar will push the system to the limit, so you will need to fly less fuel, reducing the autonomy but this is not the way we like to work and this is not the way our product should work.

To get what you want, we need to use a T-motor propulsion system (24"-29" propellers and pancake motors) and a bigger frame. With 24" propellers and 230kv motors, it will fly about one hour with your payload.

With 30" propellers and 85 kV motors, it will fly more than two hours.

 The lead time will be the same, 60 days.

The cost for the first configuration is 5.900

The cost for the second is 6.400€



You need to be a member of DIY Drones to add comments!

Join DIY Drones

© 2019   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service