APM 2.6 - TBS Discovery Build

3689535733?profile=original

Hello everyone,

I am super excited to be back on the board and ready to play with my new incoming APM! I have had some experience with the DJI Naza but I always felt that I was missing out on something. So here I am today about to begin my build.  

Here's the build:

TBS Discovery frame

APM 2.6 w/ external compass and uBlox GPS (Awaiting Shipping)

3DR Telemetry Kit (Awaiting Shipping)

4x RCTimer HP-2212 1000 kV Motors

4x RCTimer SK-30A SimonK ESCs

Turnigy 9XR

FrSky DJT Combo

4x RCTimer Carbon Fibre 9x4.7 Props

I picked the TBS Discovery for a bunch of reasons but I am really concerned about its integrated PCD bottom plate causing havoc with the APM. Does anyone have any suggestions?

I've searched far and wide on the web for similar APM TBS Discovery setups but I have been unable to find any photos or explanations about how to best connect & place everything. So if anyone has similar experience please chime in.

Eventually, I want to FPV but I need to hide some more cash away from the wife before I do that. So in the meantime, I'm looking forward to tinkering with the APM and playing the telemetry. 

I know everyone has a lot of experience here so please help me out with suggestions.

.... Sooooooo excited!

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • #NOTE: 08/10/2013 20:44:01 Frame : TBS
    ACRO_BAL_PITCH,200
    ACRO_BAL_ROLL,200
    ACRO_P,4.5
    ACRO_TRAINER,1
    AHRS_COMP_BETA,0.1
    AHRS_GPS_GAIN,0
    AHRS_GPS_MINSATS,5
    AHRS_GPS_USE,1
    AHRS_ORIENTATION,0
    AHRS_RP_P,0.1
    AHRS_TRIM_X,-0.01
    AHRS_TRIM_Y,0.02
    AHRS_TRIM_Z,0
    AHRS_WIND_MAX,0
    AHRS_YAW_P,0.1
    AMP_PER_VOLT,18.002
    ARMING_CHECK,0
    AXIS_ENABLE,1
    BATT_CAPACITY,5000
    BATT_CURR_PIN,12
    BATT_MONITOR,4
    BATT_VOLT_PIN,13
    CAM_DURATION,10
    CAM_SERVO_OFF,1100
    CAM_SERVO_ON,1300
    CAM_TRIGG_TYPE,0
    CH7_OPT,0
    CH8_OPT,0
    CIRCLE_RADIUS,10
    CIRCLE_RATE,5
    COMPASS_AUTODEC,1
    COMPASS_DEC,-0.405
    COMPASS_LEARN,0
    COMPASS_MOT_X,-2.492
    COMPASS_MOT_Y,-2.777
    COMPASS_MOT_Z,-1.406
    COMPASS_MOTCT,2
    COMPASS_OFS_X,263.811
    COMPASS_OFS_Y,1128.999
    COMPASS_OFS_Z,-520.113
    COMPASS_ORIENT,0
    COMPASS_USE,1
    ESC,0
    FENCE_ACTION,1
    FENCE_ALT_MAX,50
    FENCE_ENABLE,0
    FENCE_RADIUS,120
    FENCE_TYPE,3
    FLOW_ENABLE,0
    FLTMODE1,0
    FLTMODE2,2
    FLTMODE3,5
    FLTMODE4,0
    FLTMODE5,0
    FLTMODE6,6
    FRAME,2
    FS_BATT_ENABLE,0
    FS_GCS_ENABLE,0
    FS_GPS_ENABLE,1
    FS_THR_ENABLE,0
    FS_THR_VALUE,975
    GND_ABS_PRESS,101177.1
    GND_TEMP,30.628
    HLD_LAT_I,0
    HLD_LAT_IMAX,3000
    HLD_LAT_P,1
    HLD_LON_I,0
    HLD_LON_IMAX,3000
    HLD_LON_P,1
    INAV_TC_XY,20
    INAV_TC_Z,5
    INS_ACCOFFS_X,0.009
    INS_ACCOFFS_Y,0.244
    INS_ACCOFFS_Z,0.916
    INS_ACCSCAL_X,0.992
    INS_ACCSCAL_Y,0.999
    INS_ACCSCAL_Z,0.984
    INS_GYROFFS_X,-0.015
    INS_GYROFFS_Y,-0.024
    INS_GYROFFS_Z,0.006
    INS_MPU6K_FILTER,20
    INS_PRODUCT_ID,88
    LAND_SPEED,50
    LED_MODE,9
    LOG_BITMASK,830
    LOITER_LAT_D,0
    LOITER_LAT_I,0.5
    LOITER_LAT_IMAX,400
    LOITER_LAT_P,1
    LOITER_LON_D,0
    LOITER_LON_I,0.5
    LOITER_LON_IMAX,400
    LOITER_LON_P,1
    LOW_VOLT,9.8
    MAG_ENABLE,1
    MNT_ANGMAX_PAN,4500
    MNT_ANGMAX_ROL,4800
    MNT_ANGMAX_TIL,6600
    MNT_ANGMIN_PAN,-4500
    MNT_ANGMIN_ROL,-4500
    MNT_ANGMIN_TIL,-5000
    MNT_CONTROL_X,0
    MNT_CONTROL_Y,0
    MNT_CONTROL_Z,0
    MNT_JSTICK_SPD,3
    MNT_MODE,3
    MNT_NEUTRAL_X,0
    MNT_NEUTRAL_Y,0
    MNT_NEUTRAL_Z,0
    MNT_RC_IN_PAN,0
    MNT_RC_IN_ROLL,0
    MNT_RC_IN_TILT,0
    MNT_RETRACT_X,0
    MNT_RETRACT_Y,0
    MNT_RETRACT_Z,0
    MNT_STAB_PAN,0
    MNT_STAB_ROLL,1
    MNT_STAB_TILT,1
    MOT_TCRV_ENABLE,1
    MOT_TCRV_MAXPCT,93
    MOT_TCRV_MIDPCT,52
    OF_PIT_D,0.12
    OF_PIT_I,0.5
    OF_PIT_IMAX,100
    OF_PIT_P,2.5
    OF_RLL_D,0.12
    OF_RLL_I,0.5
    OF_RLL_IMAX,100
    OF_RLL_P,2.5
    PILOT_VELZ_MAX,250
    RATE_PIT_D,0.004
    RATE_PIT_I,0.1
    RATE_PIT_IMAX,500
    RATE_PIT_P,0.15
    RATE_RLL_D,0.004
    RATE_RLL_I,0.1
    RATE_RLL_IMAX,500
    RATE_RLL_P,0.15
    RATE_YAW_D,0
    RATE_YAW_I,0.015
    RATE_YAW_IMAX,800
    RATE_YAW_P,0.2
    RC_SPEED,400
    RC1_DZ,30
    RC1_MAX,2040
    RC1_MIN,1004
    RC1_REV,1
    RC1_TRIM,1520
    RC10_DZ,0
    RC10_FUNCTION,7
    RC10_MAX,1900
    RC10_MIN,1100
    RC10_REV,-1
    RC10_TRIM,1500
    RC11_DZ,0
    RC11_FUNCTION,8
    RC11_MAX,1900
    RC11_MIN,1100
    RC11_REV,1
    RC11_TRIM,1500
    RC2_DZ,30
    RC2_MAX,2023
    RC2_MIN,995
    RC2_REV,1
    RC2_TRIM,1520
    RC3_DZ,30
    RC3_MAX,2045
    RC3_MIN,992
    RC3_REV,1
    RC3_TRIM,999
    RC4_DZ,40
    RC4_MAX,2000
    RC4_MIN,1003
    RC4_REV,1
    RC4_TRIM,1519
    RC5_DZ,0
    RC5_FUNCTION,0
    RC5_MAX,2047
    RC5_MIN,988
    RC5_REV,1
    RC5_TRIM,992
    RC6_DZ,0
    RC6_FUNCTION,0
    RC6_MAX,1941
    RC6_MIN,1094
    RC6_REV,1
    RC6_TRIM,1098
    RC7_DZ,0
    RC7_FUNCTION,0
    RC7_MAX,1499
    RC7_MIN,1498
    RC7_REV,1
    RC7_TRIM,1499
    RC8_DZ,0
    RC8_FUNCTION,0
    RC8_MAX,1499
    RC8_MIN,1498
    RC8_REV,1
    RC8_TRIM,1499
    RSSI_PIN,-1
    RTL_ALT,1000
    RTL_ALT_FINAL,200
    RTL_LOIT_TIME,5000
    SCHED_DEBUG,0
    SERIAL3_BAUD,57
    SIMPLE,0
    SONAR_ENABLE,0
    SONAR_GAIN,0.2
    SONAR_TYPE,0
    SR0_EXT_STAT,2
    SR0_EXTRA1,10
    SR0_EXTRA2,10
    SR0_EXTRA3,2
    SR0_PARAMS,50
    SR0_POSITION,3
    SR0_RAW_CTRL,2
    SR0_RAW_SENS,2
    SR0_RC_CHAN,2
    SR3_EXT_STAT,2
    SR3_EXTRA1,10
    SR3_EXTRA2,10
    SR3_EXTRA3,2
    SR3_PARAMS,0
    SR3_POSITION,3
    SR3_RAW_CTRL,2
    SR3_RAW_SENS,2
    SR3_RC_CHAN,2
    STB_PIT_I,0
    STB_PIT_IMAX,800
    STB_PIT_P,4.5
    STB_RLL_I,0
    STB_RLL_IMAX,800
    STB_RLL_P,4.5
    STB_YAW_I,0
    STB_YAW_IMAX,800
    STB_YAW_P,4.5
    SUPER_SIMPLE,0
    SYSID_MYGCS,255
    SYSID_SW_MREV,120
    SYSID_SW_TYPE,10
    SYSID_THISMAV,1
    TELEM_DELAY,0
    THR_ACC_ENABLE,1
    THR_ACCEL_D,0
    THR_ACCEL_I,1.5
    THR_ACCEL_IMAX,500
    THR_ACCEL_P,0.75
    THR_ALT_I,0
    THR_ALT_IMAX,300
    THR_ALT_P,1
    THR_MAX,1000
    THR_MID,600
    THR_MIN,130
    THR_RATE_D,0
    THR_RATE_I,0
    THR_RATE_IMAX,300
    THR_RATE_P,6
    TOY_RATE,1
    TRIM_THROTTLE,587
    TUNE,0
    TUNE_HIGH,1000
    TUNE_LOW,0
    VOLT_DIVIDER,10
    WP_INDEX,0
    WP_TOTAL,1
    WP_YAW_BEHAVIOR,2
    WPNAV_ACCEL,250
    WPNAV_LOIT_SPEED,750
    WPNAV_RADIUS,200
    WPNAV_SPEED,500
    WPNAV_SPEED_DN,150
    WPNAV_SPEED_UP,250

  • looks like we will have to pull together on this one antonio , ive just finished my disco pro too but turning the apm is challenging to say the least
  • Hi Guys,

    Interesting posts there.  I have just put together a DiscoPro with DJI 920Kv motors, DJI ESC's, Graupner 9x5 props, ardupilot 2.5 with external gps/compass module and running 4s 3300 batteries.  Can anyone share the setup gains for rate, stabilise, hold, etc.  It would be very usefull to compare mine to your.

    Many Thanks in advance.

    Tony

  • already read your one  @Euan Ramsay , these two are the only disco/apm builds i could find i have received my kit  yet so im still doing the ground work

  • Can you guys share your configs?  I just put my disco back together with the latest code and it was a nightmare to tune.  I've never had this much trouble tuning a quad before.

  • Btw - this is my APM built and how to mount the APM. It's 3S but the main build is the same. I will be on 4S from next week with identical layout.

    http://www.diydrones.com/profiles/blogs/tbs-disco-apm-mounting-sugg...
  • Yes, I do! You can overlap the Mission Planner HUD, using a RCA to USB video converter like this one: http://www.readymaderc.com/store/index.php?main_page=product_info&a...

  • but talking about ground stations , have you seen anyone transmitting video to the ground, inputting analog to digital into a laptop and then over laying the mav link telemetry on a laptop , so you could get away with only one screen? seems like the logical way to go ?

  • ha , thats awesome :) my planned ground station wont be as epic , just a nexus 7 mounted to my controller , and simple fat sharks but i would love to use a laptop and oculus rift goggles once they get the latency down big things are happening !!!

  • @Robin - I saw two good projects that inspire me (http://diydrones.com/forum/topics/trouble-with-video-signal-after-e...) and I got this unit: (http://www.ebay.com/itm/Black-Box-KVT317A-R2-T-17-Inch-LCD-Touchscr...).

    I think a Pelican case 1560 is enough, so I can put the keyboard, monitor and mouse inside the case and there is space to put batteries and others equipments.

    So, I can connect any kind of laptop at the pelican case!

This reply was deleted.