Blogs

Arduspyder (hexa) [NOW open for orders]

Posted by Pieter van Woerkom on August 3, 2011 at 6:30am

What about this ARDU Hexa?

Carbon CNC frame

Aluminium standoffs

Titanium screws

etc etc

More pictures at: http://holco.picturepush.com/album/154602/p-Arduspyder.html

We did this project together. Mario for the ideas me drawing and routing.

arduspyder, hexa

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

Pieter van Woerkom August 5, 2011 at 3:26am

Just another rendering of the design.
Paul Mather August 4, 2011 at 7:58pm

You're one of the 3 people who's actually got an OpenPilot board? How did you come upon that?
Mario de Roos August 4, 2011 at 2:24pm

We are considering to go on the market with this Spyder frame, all depends on the interest because less then 10> frames aunt profitable.

Because you can buy 10x10mm aluminium tube everywhere in the world we think its better to leave them out to save on shipping cost.

So it would be the two CNC carbon frame plates plus the two adjustable carbon lipo holders 32 pieces 10mm and 3 pieces 15mm aluminum standoff's and 70 pieces of stainless steel hex flat head screws M3 x 6mm

Price ex assured shipping €100,00
Scott Plunkett August 4, 2011 at 1:45pm

Absolutely beautiful design. Clean, elegant, just very nicely done.
Mario de Roos August 4, 2011 at 1:06pm

Wiring will go thru the booms for a nice and clean setup.

http://www5.picturepush.com/photo/a/5957243/img/Arduspyder/P6244025...
Pieter van Woerkom August 4, 2011 at 12:54pm

Don't really understand your question, but your smile tells me a lot.
ionut August 4, 2011 at 12:51pm

What about autonomy, do you run a cable behind the scene ?:)
Mario de Roos August 3, 2011 at 11:44am

Insite construction this give a very ridged result.
Pieter van Woerkom August 3, 2011 at 5:58am

Well as mentioned before we do custom builds for anyone interrested. We build like they do at American Chopper. You have an idea and we mix it with our own interpretations and you get a magnificent flying machine. For now kitting is not our thing (unless you order >10 kits)
OlivierD. August 3, 2011 at 5:53am

Fabulous! You have to make a kit and sell it, this is superb work.