Blogs

Bidirectional RC transmitter with ARM7, Xbee PRO, Bluetooth and a PDA (2)

Posted by jlcortex on March 12, 2009 at 12:37pm

I am working in my bidirectional transmitter. i has built parts in plastic with my hobby cnc machine. it looks very technical device!!!i have not received PCB yet.i post some pictures of not finished assembly.We are testing XBee Pro Series 2 with ZB firmware now, it seems than 5 Kbytes/sec is possible. We publish transfer rate speed as soon as we finish testings.jlcortexnmine.com

E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Tod Rippin January 29, 2015 at 4:53pm
    So where is this at now?
  • TooManySecrets January 3, 2015 at 7:35am

    Where you able to find the files?

  • TooManySecrets January 2, 2015 at 9:57am
    Btw really nice design.
  • TooManySecrets January 2, 2015 at 5:26am

    Thx sent you a friend request with my email.

  • jlcortex January 2, 2015 at 5:05am

    Wow, This post has almost 6 years!

    but yes, i can share this design, please send me your email by private and i will send you.

    It has been dificult to find after all this time

  • TooManySecrets January 2, 2015 at 2:34am

    Would you mind on sharing the disign for this. Not the PCB but the stractual disign for the controller.

  • Vitalii S. August 22, 2013 at 5:21am

    Hi Jose Luis Cortes!
    Currently I work on the same project. We also use XPee pro series with external antennas and going to design ground station for multitarget UAV systems.

    Where can I read more about your project? Any blog or site?

  • Torin Segstro March 13, 2009 at 3:12pm
    Very nice work. I also have a CNC that I built for hobby use. Are you going to make your windows mobile software open source? I have an old Dell V50 that I could use as well as Thomas' long range UHF control system.
  • Earl Jr. March 13, 2009 at 2:36pm
    Is the PDA permanently mounted into the controller or are you able to remove it?
  • jlcortex March 13, 2009 at 2:20am
    Hi Kyle, i am using a cheap manual mill machine (zx7035 with circular column) converted to CNC with 3 servo motors and Mach3, no ball screews.

    Hi Widyawardana Adiprawita, this gimbals are from a walkera radio

    jlcortex
    nMine.com
This reply was deleted.