Blogs

Free OS UAV Plan!

Posted by Ryan on November 13, 2010 at 6:30am
I designed this baby over the weekend for everyone to have if interested. It should be a very good size for most of your application. I can be built with foam, wood, and composite.


Name: RVOS v.1.0
Wing Span: 1.6m
Length: 1.1m (nose to tip of v-tail)
Max Weight: 6kg
Recommend 4 Channels (Aileron, V-tail, Throttle)
Power: .45 - .65 cu.in. or equilvalent electric power

DOWNLOAD ZIP FILE HERE!!!!





E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Ryan November 1, 2011 at 7:24pm

    Sorry for the missing file

     

    HERE IT IS

     

    Cheers

  • Richard T Leiterman November 1, 2011 at 5:42pm

    Hi Ryan.  I've been trying to down load the files on your model RVOS v.1.0 to no avail.  I keep coming up with

    404 Error File Not Found.  Have you discontinued the posting?  Pls advise if you got a couple of minutes to dickdar1@verizon.net.  Thank you for your time, and you assistance. 

    Best Regards  Richard T Leiterman.

     

  • Roger A September 19, 2011 at 2:34am

    Dave, the link for the STEP version gives an error (unresolved URL). Can you please check or provide a different link please.

     

  • Ahmed Rehan September 18, 2011 at 8:52am

    The file download link is not working.

  • Gjorgji GJorgjiev May 28, 2011 at 7:34am
    Rayan I would really like to have a 3D file with dimensions, can you send it to me? gorgi.gorgiev@gmail.com
  • Robert Simpson March 22, 2011 at 1:08pm
    nevermind, managed to get the zip to extract eventually
  • Robert Simpson March 22, 2011 at 12:58pm

    very nice design, could you send me the 3D file. ide like to design a plane very similar to this, would be a good base for me. my email is 93simpsonr@gmail.com

    cheers

  • Dave Buckley November 26, 2010 at 3:37am
    Zip file here. Perhaps Ryan could add it to his original post?
  • Dave Buckley November 26, 2010 at 12:47am
    @AA
    I'll output the files to STEP and place a link here later this evening.
  • Alex Funi November 25, 2010 at 9:00pm
    I wrongly assemed there would be a neutral format version in the zip as well. I am a PTC guy, anyone want to put up a stp/step/iges/igs for those of us that don't have SW? I was thinking of running some aero simulations on it if I get some free time for it (and a file I can open).

    Thanks a lot
This reply was deleted.