This week I tested my (almost) finished mini octocopter wich is build on a 3D printed frame.
Motor to motor is 360mm. Max 5 inch prop can be mounted on 18xx or 22xx motors.
Flightcontroller: APM 2.5
FPV: 700TVL sony cam / 5.8GHZ 25mw / MinimOSD
Telemetry: Lantronix B/G WIFI module
RC: 40mhz analog
Drive: DYS 1806-2300kv / Gemfan 5030 / HK 12a ESC / 3s 3000mAh
Total AUW: 1050 grams
All details as wel as a maiden flight video can be found on my blog:
-> OLH-360 Blog <-
Comments