Blogs

UgCS integration with ADS-B and 3D Robotics Arducopter

Posted by Janis Kuze on January 19, 2015 at 8:00am

3689634656?profile=original

Today we again sucessfully flew Arducopter with ADS-B transmitter. Flight was detected on Flightradar24.com along with other aircraft.

Our Arducopter has formal and legal ICAO registration and probably is first in its class in the world to get formal ICAO ID.

We used microADS-B reciever and our UgCS software to monitor the mission. In paralel also used Sagetech Reciever (screenshot)

Please see whole mission in our video

Thanks,

UgCS Team

Tags: 3d, ads-b, arducopter, robotics, ugcs
E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Jethro Hazelhurst January 26, 2015 at 1:49am

    10/10, these are key steps toward full commercial integration, thanks for sharing.

  • Alexey Dobrovolskiy January 19, 2015 at 10:02pm

    Hi,

    little bit later we will publish all information including schematics and source code. 

  • Rostislav Kolotov January 19, 2015 at 2:57pm
    Alexey,
    This is a one piece of long antenna!!!!
    Could you share transponder setup and spec.
    Way to go.!!!!
  • Rostislav Kolotov January 19, 2015 at 2:57pm
    Alexey,
    This is a one piece of long antenna!!!!
    Could you share transponder setup and spec.
    Way to go.!!!!
  • Alexey Dobrovolskiy January 19, 2015 at 1:24pm

    Photo of our transponder equipped copter (with transponder antenna)

    3701917093?profile=original

This reply was deleted.