Moderator

 

3689582111?profile=original

 

Today i create a Google Community Group for manage the beta testing of VR Pad Station this is the link : 

http://plus.google.com/communities/102697330643558260161

This is the official Virtual Robotix Discussion group about VR PAD Station 2.0 :

http://www.virtualrobotix.com/group/vr-pad-station-2-0

 

We upload the last revision of VR radio RC . The new name is VR PAD Station 2.0 . We integrated the mavlink 1.0 telemetry function with original Virtual RC project so now is possible to use VR PAD Station as tools for :

  • Receive telemetry from drone.
  • Setting Parameter .
  • Change Flight Mode.
  • Set waypoint.
  • Send direct command as Return to Landing point , Land or Guided mode.
  • Virtual Remote control with a lot of advanced feature for setup the radio stick

We are work in progress with some advanced feature as Special Follow me mode , Fligh log book and VR Gimbal integration.

The App is compatible with APM Copter , Plane and Rover.

Inside the community could be possible discuss directly with developer about the new request feature .

After join the community could be possible download the APK in a special section of  google play

 

This is the direct link to google play store beta registration: 

https://play.google.com/apps/testing/com.laser.VrPadStation

 

If you yet register in the community appear this message .... 

 

3689582050?profile=original

If your registration accepted you can download the beta testing of our application :)

.

3689582124?profile=original

 

Feedback about our application are welcome ... :) In the next week we intend improve a lot the application with new feature under development.

Credits about Opensource component : 

The VR Pad Station it's a framework of advanced opensource tools and library from different source : 

the mavlink comunication library and it's original user interface is a fork of great work doing by  Arthur Benemann and his team in rev 1.0 of droidplanner .

The library used from video decoding is a wrapping library from : opensource VLC project.

The GPL code modify and improve by our Team will be release in the next days at this address :

https://code.google.com/p/vr-pad-station/ 

Best

Roberto

 

 

 

E-mail me when people leave their comments –

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Moderator

    The complete source of VR Pad Station is available on our repository , if developer or beta tester would join to development are welcome :)

    Best

    Roberto

  • Admin

    Craig,

    You are right , only owner and mods can delete the comment.

    I am with you and Gary. I do not approve of such behavior where critical comments are deleted unless they are in violation of TOS or use abusive language. It is just matter of time  before we catch the rogue. :(

  • Moderator

    I Check in the my email notification and no other post are delete from this blog post ... could be nice to understand who and why delete this post ... for me is not a problem the comment from Arthur infact i contact Arthur and speak about the GPL Code that will be release and also add in the blogs the credits to other library that is inside our code .... 

    Credits about Opensource component : 

    The VR Pad Station it's a framework of advanced opensource tools and library from different source : 

    the mavlink comunication library and it's original user interface is a fork of great work doing by  Arthur Benemann and his team in rev 1.0 of droidplanner .

    The library used from video decoding is a wrapping library from : opensource VLC project.

    The GPL code modify and improve by our Team will be release in the next days at this address :

    https://code.google.com/p/vr-pad-station/ 

  • Developer

    Gary, I believe the only people who could delete anything in this thread would be Roberto as the owner or one of the moderators.  Is that correct?

  • Moderator

    Comment deleting seems to be catching on around here, it is as you say Craig very bad form. 

  • Developer

    Thank you Roberto.  Now I would really like to understand who deleted the posts.  Does anybody have insight here about why these two posts were removed?

  • Moderator
    @Craig ,
    i found this in my email ....
    @Roberto Navoni (http://diydrones.com/profile/RoberoNavoni):
    Your software looks to use a lot of elements from DroidPlanner (https://github.com/DroidPlanner/droidplanner), which makes me think it also uses the core Drone/MAVLink communication code. But I do not see link's the source code, which is required by the GPLv3 license of the droidplanner code (even if you just partly the GPL licensed project). Could you clarify on this issue?
  • Developer

    Hello all

    I am trying to get to the bottom of a couple of posts that were deleted from this thread.  The first was a message from Arthur and the second is the response from Roberto.  I have a copy of the notification of Roberto's response but not Arthur's original message.  It is very bad form to be deleting posts.  What follows is Roberto's response.  If anybody has a copy of the notification of Arthur's post I would appreciate you emailing it to me.

    Thanks,

    Craig

    ---------- Forwarded message ----------
    From: DIY Drones <mail@diydrones.com>
    Date: 2014-03-16 15:47 GMT-03:00
    Subject: Roberto Navoni commented on the blog post "VR PAD Station 2.0 available for beta testing on APM , PIXHAWK and VRBRAIN ." on DIY Drones


    Roberto Navoni commented on their blog post "VR PAD Station 2.0 available for beta testing on APM , PIXHAWK and VRBRAIN  ." on DIY Drones

    ------------
    Hi Arthur, 

    the code will be available as opensource when we finish to prepare the code on git , as other project : VR Brain and VRGimbal , there are inside a lot of module write by scratch by our team , We are using mavlink protocol but optimize it to improve the quality of comunication.

    We are working to an API for recall the code from 3th part developer an approch not yet available in other application . The main reason because we are working on this project is because we intend optimize the integration with our platform as VR Brain and VR Gimbal but continue to support also APM and Pixhawke platform.  

    Sorry is not yet available GIT but it will be in some days .

    P.S.

    congratulation with your great work on DroidPlanner 2.0 the new interface is very nice :)

    Best

    Roberto 
    ------------

    To view the new comment, visit:
    http://diydrones.com/profiles/blogs/vr-pad-station-2-0-available-fo...

    --
    To stop following this blog post, go to:
    http://diydrones.com/profiles/blog/show?id=705844%3ABlogPost%3A1593...

    To control which emails you receive on DIY Drones, go to:
    http://diydrones.com/profiles/profile/emailSettings?xg_source=msg_c...

  • Moderator

    The opensource code will be available here :

    https://code.google.com/p/vr-pad-station/

    this add to other four opensource project manage in last 5 years : 

    https://code.google.com/p/lnmultipilot10/

    https://code.google.com/p/multipilot32/

    https://code.google.com/p/vrbrain/source/list

    https://code.google.com/p/vrgimbal/source/list

    best

    Roberto

  • Developer

    @Roberto

    No problem, just take care to give credit (for the android app) to the DroidPlanner developers next time. Also when public announcing a release you should release the code with it.

    I'm in no way against forks of the code, I just want everyone to benefit from it.

This reply was deleted.