Blogs

Yet another Build log - Epp FPV Part 3

Posted by Yiangos Yiangou on May 28, 2011 at 6:28am

First of all I installed some magnets on the wings (so they can be detachable)3689409444?profile=original

Then i took out some foam and glued some Velcro to make space for my 2 5000mah batteries

 

3689409524?profile=original

 And finally the Gopro pan/tilt mount :)

3689409145?profile=original

 

E-mail me when people leave their comments –
Follow

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • T.D. Gonzales June 20, 2011 at 3:35pm
    How is did it handle with 2 5000 mAh batteries in the nose? I'm just curious since I am looking at getting this plane.
  • Yiangos Yiangou May 30, 2011 at 12:53am

    Thank you kirill

    Darren looks nice, I'll try it in a bit :)

  • Kirill May 29, 2011 at 11:53pm
    Nicely done! I like it!
  • Darren May 29, 2011 at 1:41pm

    I lifted the white plastic and glued directly to the foam on the upper side, then glued the plastic down.

    3692216694?profile=original

  • Yiangos Yiangou May 29, 2011 at 1:09pm

    Thank you darren :)

    If you like post some pics as it would be nice to see your idea in action . Who knows I might even borrow it :p

  • Darren May 29, 2011 at 12:54pm

    Looking good!

    I did the same with the magnets; and then I used the left over wood from the tail pieces, and sandwitched them to the trailing edge of the wing. Where the wing it sits on the wood plank by the motor. It makes it nice and level, and will be adding twist lock connectors. (I'm not fond of rubberbands) And will also be adding leading edge attach points as well.

    As this is your build; I didnt post any pics... but let me know if you do.

This reply was deleted.