Blogs

You need to be a member of diydrones to add comments!

Join diydrones

Comments

  • Moderator
    Robert Krogh (hooks) March 26, 2010 at 1:39am
    About documentation:
    Best possible setup:
    Motor
    Prop
    Servo
    Battery 11.1 or 14.8
    Flight time
    Etc.
  • Bart March 26, 2010 at 12:57am
    What do you have in mind (heling with documentation...)
  • Moderator
    Brian March 25, 2010 at 12:56pm
    Looks great. Wish I could help, but expect you'd not want to send anything all the way to SF Bay area...
  • Morli_ March 25, 2010 at 10:46am
    documentation for assembly, Hooks? I will be free for new few days and can try ,let me know as to what do you want ?
  • Moderator
    Robert Krogh (hooks) March 25, 2010 at 9:58am
    Wings will be made with ailerons, and are not ready for show yet.
    This is a new platform still under construction. I know we all want a great platform for lowest price - but i'm not sure it would be possible to sell in big numbers - which meens higher price. This platform are special made for the UAV/FPV job.

    Will be ready for test late April.
    Anybody interested in helping out, looking for one person who can help out with documentation!
  • Morli_ March 25, 2010 at 9:41am
    I guess the wing is inside those sliver wing carry case/pouch :-),, but there is week of work to complete it + painting etc I guess
  • T3
    Krzysztof Bosak March 25, 2010 at 9:24am
    "his frame will break most often (i suspect on experience) where the fuse meets the tail spar. "
    ...and where the airplane meets ground.
  • Donald Gallay March 25, 2010 at 9:17am
    what do the wings look like?
  • Morli_ March 25, 2010 at 8:49am
    may be the tail should go as plug-in/removable too and available as spare if/when required
  • bGatti March 25, 2010 at 8:46am
    I see loads of top access.
    The replaceable nose cone is probably a good idea. This frame will break most often (i suspect on experience) where the fuse meets the tail spar.
This reply was deleted.