Discussion group for ArduCopter users
Building Possibly My Last Multicopter
I left the hobby in 2022 after the crash of my Tarot Ironman due to a propeller blade separation resulting in complete destruction of the aircraft. Since then I have been flying an old DJI MAvic Pro that I bought used from a photographer who wanted to upgrade. Anyway, recently l've thought about wanting to build one more multicopter. I enjoyed the challenges of building one plus the satisfaction of flying something I built. So I decided to once again embark on a build project. My needs…
Read more…
Comments
no matter what I try I can not get the optical flow test sketch to compile for apm2 does anyone have a copy of the sketch that's already edited for apm2 ? yes I am clueless about programming
Hey all - after finally receiving my backordered FatShark goggles and having a jolly ol' time flying around, the need for an OSD has become quite apparent. Luckily I had already purchased the MinimOSD a few months earlier. I tried config'ing it but received what appears the be a common problem of not being able to speak to the bootloader. I followed the information found here and here, checked this out and also this.
I did see that I needed a FTDI cable to speak to the MinimOSD and upload a bootloader so good thing I already had this cable.
However - still no go. Would someone that has had success with this kindly let me in on something I may have missed via here or PM.
Many thanks,
David.
Thanks Randy
Your suggestion worked. I loaded AC2.9.1b to my APM1.4 and my Quad is back to flying.
You aren't seriously thinking of flying without an R/C controller, are you?
Hello all
I am new in DIY Drones
need to help
I work in my final year project
Using quadcopter .
Can I calibrate the ESC by using joystick only via Mission planner without the use of RC ?
Please help me very very necessary
@Gireesh,
On the mission planner's firmware screen you will see a Load Previous Firmware link on the bottom right. After clicking the download select an entry that has "AC2.9.1b" at the end
How I can get software version : 2.9.1 for APM 1.4. It is no longer supported.
so I have been away for awhile is the optical flow sensor supported on APM2.5
Hey all,
Just thought I would drop a quick note here to tell all that the 5th DIYDrones Melbourne, Australia meet is happening this Sunday from 08:30 at Williamstown. Check out the Melbourne group for more details. (:
All welcome. (: