Discussions

HUD overlay fluctuation

Posted by Zvika Fayer on June 25, 2015 at 12:06pm

Hello

I'm using EZ cap and trying to have an overlay of the video on the HUD.

when i start the video the HUD roll starts to jitter.

I've checked .. there is no RF/EMI interference... all seems to work well.. but the overlay,

I have a laptop PC with WIN XP on... 

Thanks

You need to be a member of diydrones to add comments!

Join diydrones

Tags: hud, overlay
Email me when people reply –
Follow

Replies

  • Jeremy Stromsoe November 27, 2015 at 2:44pm

    Having the same issue, using an MJPEG video overlay with the following codec.  I would upload a video of the jitter but it is so fast that my screen recorder wont record it at a high enough frame rate to capture the jitter.  

    This is on a test setup (no motors, esc's ect... for interference).  Has anyone else experienced this issue?  Also would be nice if the overlay would accept some other (much more efficient) type of video stream i.e. H264 or similar.  

    Zvika did you ever fix the issue?

    3702133584?profile=original

    • Zvika Fayer > Jeremy Stromsoe November 28, 2015 at 2:23am

      Alas nothing helped Jeremy ...

      bought another grabber.. supposed to be an original one with the same jitter 

      bought a designated monitor instead :-(

This reply was deleted.

Activity