I have decided to sell my quad copter since I have not been able to use it as much as I would like. Better to have this stuff used by someone than gather dust in my basement. As you can see in the pictures, everything is mounted on the Alien frame right now but I think it was a bit more stable on the Z600 X frame. This copter is ready to fly, just charge the batteries and go. The vibration measurements are within specs when viewing the data in mission planner but I did not get around to running auto tune. The videos are from when it was mounted on the X frame with a video of the return to land function. All batteries have been charged recently and then put back into storage mode. I also converted the transmitter to 3 cell Lipo for longer run time. Please let me know if you have any questions.
$500 buys everything and I will ship for free (ground) in the continental US.
1 - 3DR APM 2.6 controller
1 - 3DR GPS w/compass
1 - 3DR telemetry kit
1 – Hobby King Z600 frame
1 – Alien Copter 430mm Bee full Carbon KIT W/Clean and Dirty System and PDB W/BEC
1 - Turnigy 9X transmitter
5 - Afro 30 amp speed controllers
9 - NTM Prop Drive 28-30S 800KV / 300W Brushless Motors
2 - 3300mah 4 cell Turnigy Nano Tech batteries
2 - 5500mah 4 cell Turnigy Nano Tech batteries
1 - DC battery charger
1 - AC/DC battery charger
1 - Self leveling gimbal for GoPro (GoPro not included)
1 - USB programming stick for speed controllers
1 - Battery alarm
1 - prop balancer
Tons of props (don’t ask how I ended up with so many) 9”, 10” 11”
http://share.shutterfly.com/action/welcome?sid=0BZOW7Zm5bMnVQ
https://www.youtube.com/watch?v=mzNCjHOzq9M
Replies