Gender
Male
About
Location
Monroe, WA
About Me:
First RC is a DIY Hex. I come from a robotics background, I'm new to RC
Please tell us a bit about your UAV interest
Building a fully autonomous UAV that is also pilotable with full telemetry in every way possible. I like building things to see if I can make them work the best that they can.
Hometown:
Monroe Wa
Activity Feed
"I've seen conflicting posts about using serial 5 as an extra serial port by using a splitter on power and ground leads. Some say it is usable as another serial port, others say it is only good for console output.
I have an SF11 that I am trying to…"
I have an SF11 that I am trying to…"
"Well it looks like my wires and device are good, at the end of my I2C lead, I'm showing 3.2V on the green and white leads and 5V on the red lead when powered via USB, and it looks like a signal is being produced on the green and white leads."
"Any luck getting the SF10 to work over I2C?
I have an SF11 that I'm trying to get working on my hexacopter. The default address on the SF11 is 0x55, that should translate to 85 in Mission Planner correct? It looks good on USB, I'm gonna hook it to…"
I have an SF11 that I'm trying to get working on my hexacopter. The default address on the SF11 is 0x55, that should translate to 85 in Mission Planner correct? It looks good on USB, I'm gonna hook it to…"
