hi all i just thought i would share where i am at with my build, 

Her name is bitch face III she was named after many hours of frustration and failure. Also she is not the first Bitch Face, the other two died horrible deaths full of g forces and foam and lipo smoke. 

She is built on a Bilxer 2,D2826 2200kv outrunner, on a 7X6E prop, 2650mah 40 c 3s lipo and  turnigy metal gear servos all round.

Before gluing the wings together i added extra strength by filling the carbon tube wing spa with a 4mm soild carbon rod lathered in glue. There was also extra carbon fiber added to the interior of the wing in the form of 5mm X 1mm carbon fiber strips that were first glued to the foam insert then glued into the wing. The final piece of support was added to the wing with another 5mmX1mm carbon rod both glued and taped to the wing

Inside is JAMMED an APM 2.5, power module, 3DR Radio, OSD and turnigy 9x receiver. the nose camera sits hobby king fibreglass pan and tilt  with a 520 line camera controlled by 2 180 Deg servos

In the cockpit i placed, gps, air speed, video antenna as well as telemetry antenna. I cut the top out of the plane and slotted in the video transmitter as well as the ESC for cooling

And that concludes this little intro in Bitch Face III please feel free to post thoughts and comments