3D FPV camera The BlackBird 2

3691246499?profile=original

I want to talk about 3D FPV camera The BlackBird 2. I will not write many words, I'll just post pictures and videos if anyone has any questions - write, I will answer them.

BlackBird 2 what is different from other cameras?

Video modes:

The main feature of the BlackBird 2 is the ability to generate videos in various 3D formats, allowing you to use this stereo camera with almost any 3D FPV video glasses

3689668358?profile=original

Video modes:

  • SIDE BY SIDE 3D (SBS)
  • SIDE BY SIDE 3D Crop 16x9
  • SIDE BY SIDE 3D Crop 4x3
  • INTERLACED 3D
  • Two channel 3D
  • 2D video

Support video glasses:

  • Carl Zeiss Cinemizer (you need a ConverterAV to HDMI)
  • Oculus Rift DK1 (you need a ConverterAV to HDMI)
  • Fat Shark Attitude v3
  • Fat Shark Dominator HD
  • HeadPaly
  • Prober EVG 920
  • SkyZone 3D
  • Sony HMZ T1 (you need a ConverterAV to HDMI)
  • Sony HMZ T2 (you need a ConverterAV to HDMI)
  • Sony HMZ T3(you need a ConverterAV to HDMI)
  • Vuzix Wrap 1200

3689660500?profile=original

OR

3689660662?profile=original

Video outputs:

The flight stereo camera The BlackBird 2 has 3 analog video outputs, with which you can simultaneously receive video:

- the first output is needed to receive the 3D/2D video signal in the selected format.

- the second video output gives video in 2D-format from the right sensor.

- the third video output gives video in 2D-format from the left sensor.

3691246606?profile=original

Size, weight and power of the camera:

3D FPV camera “The BlackBird 2” has small weight - 21 grams and very convenient size – you can set the camera on the copter, glider or RC car! Camera consumes from 5 to 15 Volts, i.e. you can connect 3D FPV camera The BlackBird 2 to the onboard Li-Po battery 2S - 3S.

3689657276?profile=original

P.S. And yet, we made a firmware for MinimOSD support SBS mode, the firmware attached to this post

This video was recorded using a cheap video capture, the quality is very low, but you can watch it using Google cardboard:

Here you can see a small video review:

FPV3DCAM-firmware-for-minimOSD-support-side-by-side-3d-sbs3d-mode-blackbird2-stereoscopic-flight-camera.hex

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • So it projects video between a single split screen or is there goggels that will isolate the display for 1 eye and 1 for other eye to look more like how we see
This reply was deleted.

Activity

DIY Drones via Twitter
RT @chr1sa: My talk on PX4 and FAA certification is coming up at 1:45 PST today on the PX4 Dev Summit livestream. Includes some cool new st…
Tuesday
DIY Drones via Twitter
RT @seesharp: I'm tuned into the PX4 / Dronecode free live conference. Great stuff. Microsoft AirSim talk in 10 minutes. https://t.co/0zbZ2…
Monday
DIY Robocars via Twitter
RT @masato_ka: 距離センサを3つとESP32を付けたラジコンカーをDonkeyCarライクにNNで自動走行。3層FC極小モデルをTensorFlow Lite for microcontrollerで動かしてる。機体は借り物でRumiCarって言います。Tenso…
Monday
DIY Robocars via Twitter
RT @SmallpixelCar: My car was able to go all the way autonomously until the crosswalk. It was only 100 yards from the target. What should b…
Jul 4
Liam left a comment on Agricultural UAVs
"Hi
I'm Liam from T-MOTOR. I would like to reach out to see if there is any possibility for us to work together.
We are a propulsion system manufacturer who offers motors, propellers and ESCs for all kinds of drone applications which vary from secur…"
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Smart move. The car used the shadow to guide it through the bridge. This was never in the training samples. But it learn…
Jun 30
DIY Robocars via Twitter
RT @SmallpixelCar: Getting closer to the target. Single camera. Untrained road. https://t.co/Wsr7RwDamj
Jun 29
Richard Cox left a comment on Australia
"Anyone in the DIYDRONES Australian subgroup based in Alice Springs, NT?
I am experimenting with Ardupilot (standard Arduplane), Pixhawk 4 FC in a 4-ch
RC "AXN Floater Jet" foamy plane..."
Jun 29
Omar Sykes left a comment on Australia
"Hi everyone, I am looking for someone who is good at drone building, repair and software in Adelaide. Please give me a call on 0477 319 219."
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: #donkeycar https://t.co/czuLoVRcA4
Jun 29
DIY Robocars via Twitter
https://t.co/DKQbNTbz0g
Jun 29
DIY Robocars via Twitter
RT @RoboticMasters: Donkey car, car car car car car car; Donkey car, car car car car car car; Donkey Car. Anyone like our tiny tiny donkey…
Jun 29
DIY Robocars via Twitter
RT @SmallpixelCar: After improving DBSCAN speed, I can get 11 frame per second on @NVIDIAEmbedded Jerson Xavier MAXN mode and the autonomou…
Jun 26
DIY Robocars via Twitter
RT @Heavy02011: Join us at next Virtual Race League: ⁦@diyrobocars⁩ Race #4 - Parking Lot Nerds, August 1st https://t.co/5KUpu7VGaH
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: #CUDA implementation should be easy, because most of the time is on distance calculations berween two points and if the…
Jun 25
DIY Robocars via Twitter
RT @SmallpixelCar: This is the view from the car. Even my lanenet inference is fast on @NVIDIAEmbedded Jerson Xavier, DBSCAN clustering tak…
Jun 25
More…