3DR Radio Probleme

Guten morgen,

ich habe mir das Telemetrieset 3DRadio gekauft umd möchte mir serielle Daten auf diesem Wege kabellos an meinen PC übertragen. In diesem Fall möchte ich mir die Daten des seriellen GPS-Empfängers übertragen. Nur das funktioniert nicht. Es werden zwar Daten übertragen, aber das ist alles andere als lesbare GPS-Daten (siehe Bild). Es sieht ganz danach aus, dass die Übertragungsparameter nicht stimmen. Gemäß dem Konfigurationsprogramm "3DRadio Config" ist es aber korrekt eingestellt (siehe Bild). 

Kann mir hier jemand einen Tip geben, was ich da falsch mache.

Grüsse hier von der Ostsee   Peter

bild3.JPG

Bild2.JPG

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Jan,

    the data is not inverted. I testing the data directly with the GPS-receiver on the com-port. The data on the com-port are OK. The data with the 3Dradio are not OK.

    Marcin,

    my GPS-reveiver is a RoyalTek Model: RGM-2000

    Regards

  • What model of GPS receiver are you using? What do you have if you connect directly GPS to PC via FTDI cable?

  • Peter,

    Could it be that the dat coming from the GPS is inverted?

    I remember doing some test in the past with an EM401 and there the data was inverted.
    I fit in a 40106 (simple hex inverter) and the problem was solved.

    Regards

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @donkey_car: Human-scale Donkey Car! Hope this makes it to a @diyrobocars race https://www.youtube.com/watch?v=ZMaf031U8jg
Saturday
DIY Robocars via Twitter
Saturday
DIY Robocars via Twitter
Jun 16
DIY Robocars via Twitter
RT @GrantEMoe: I won my first @diyrobocars @donkey_car virtual race! Many thanks to @chr1sa @EllerbachMaxime @tawnkramer and everyone who m…
Jun 13
DIY Robocars via Twitter
RT @gclue_akira: JetRacerで自動走行したコースを、InstantNeRFで再構築。データセットは別々に収集 #jetracer #instantNeRT https://t.co/T8zjg3MFyO
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: SPC 3.0 Now the motor also works. This car is doable. I just need to design a deck to mount my compute and sensors. http…
Jun 13
DIY Robocars via Twitter
RT @SmallpixelCar: My new car SPC 3.0. https://t.co/CKtkZOxeNQ
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: High speed at @diyrobocars thanks @EdwardM26321707 for sharing the video https://t.co/o4317Y2U1S
Jun 7
DIY Robocars via Twitter
RT @SmallpixelCar: Today at @RAMS_RC_Club for @diyrobocars. Used @emlid RTK GPS and @adafruit @BoschGlobal IMU. Lap time 28s https://t.co/R…
May 28
DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
More…