I just received the 3DR Video/OSD system and set it up according to the directions. The OSD displays just fine on my monitor, but there's no video from the camera. I made sure the cable was correctly connected. There are no indicator lights on the camera, but I noticed it did get warm.
I also have a GoPro video cable, so I plugged it into the OSD and plugged in a GoPro - video works great. I'm assuming I just got a bad camera, but before going through the process of trying to return and exchange it, is there anything else I can try to get this camera working?
Thanks!
Replies
After some troubleshooting with Joshua from 3DR, it appears the 5v and video signal wires were reversed on my cable. If you ordered the 3DR Video Kit, be sure to check your cable before turning on!