3dr y6 rtf fpv - $650

This rig is setup for shooting video and has proven to be rock solid. The Y frame means you'll never worry about props getting in the frame and the redundant motors help safeguard against possible motor/ESC/prop failures as well as provide a very stable platform even in high winds. The Alt Hold mode the Pixhawk offers along w/the gimbal make long breathtaking shots near effortless. 

This craft is in great condition. It was factory assembled by 3D Robotics. I've been holding off for awhile but it's time to sell this Y6. I started a new job back in January and I just dont have time for the side gigs anymore. I'm in Austin and local pickup is preferred but I am willing to ship. 


1 x 3DR RTF Y6:
1 x Pixhawk
1 x 3DR Power Module with XT60 connector
1 x 3DR u-blox GPS with magnetometer
6 x 850 Kv brushless motors
6 x 20 Amp ESCs with SimonK firmware
1 x 3DR Radio 915 MHz
1 x FrSKY X8R
4 x 4S 6000 mAh LiPo Power Pack
6 x APC Propellers 10X47 Push-Pull Set 
1 x 3DR Video/OSD System Kit:
1 x Camera with 1/3" Sony Super HAD CCD 520 TVL Camera Resolution
1 x 5.8 GHz Video Transmitter and Receiver
1 x MinimOSD Kit - Overlays Telemetry Data
1 x Pelican 1610 case
1 x Tarot T-2D V2 Gimbal
1 x SmartFPV 3ch Video Switcher (switch between nose camera and GoPro)
1 x RTF Y6 Replacement Kit:
2 x 850 Kv brushless motors (including mounts)
2 x 20 Amp ESCs with SimonK firmware
1 x replacement leg (carbon fiber, screws, and spacers)
2 x square tube replacements (one black, one blue)

**GoPro NOT INCLUDED**

?format=go&jsonp=vglnk_147612640641827&key=8a24c98a696b4e5723db293f62190b87&libId=iu4fc7dn010004o4000DL4tqq9dgb&loc=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fshowthread.php%3Ft%3D2754390%23post35903586&v=1&out=http%3A%2F%2Fstatic.rcgroups.net%2Fforums%2Fattachments%2F5%2F5%2F0%2F3%2F8%2F3%2Fa9413161-109-IMG_5390%255B1%255D.jpg&ref=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fnewthread.php%3Fdo%3Dpostthread%26f%3D733&title=3dr%20y6%20rtf%20fpv%20-%20RC%20Groups&txt=&width=750

a9413163-104-IMG_5392%5B1%5D.jpg?width=750

a9413167-23-IMG_5393%5B1%5D.jpg?width=750

?format=go&jsonp=vglnk_147612633207026&key=8a24c98a696b4e5723db293f62190b87&libId=iu4fc7dn010004o4000DL4tqq9dgb&loc=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fshowthread.php%3Ft%3D2754390%23post35903586&v=1&out=http%3A%2F%2Fstatic.rcgroups.net%2Fforums%2Fattachments%2F5%2F5%2F0%2F3%2F8%2F3%2Fa9413160-90-IMG_5389%255B1%255D.jpg&ref=http%3A%2F%2Fwww.rcgroups.com%2Fforums%2Fnewthread.php%3Fdo%3Dpostthread%26f%3D733&title=3dr%20y6%20rtf%20fpv%20-%20RC%20Groups&txt=

a9413170-6-IMG_5388%5B1%5D.jpg?width=750

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Im very interested
    filo15swp@gmail.com
  • Yes, it is still available. 

  • Hi is this still available?
  • $650. Steal at this price. 

  • Lowered price to $750. 

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @a1k0n: @DanielChiaJH @diyrobocars @circuitlaunch Here's my car's view of that race. About 8.4 second lap times for laps 2 and 3... both…
yesterday
DIY Robocars via Twitter
RT @DanielChiaJH: Great racing against @a1k0n today at @diyrobocars! Pretty cool to both break sun-9s at the track today I think I got very…
Sunday
DIY Robocars via Twitter
Broadcasting the @circuitlaunch race live now at https://m.twitch.tv/diyrobocars Races begin around 2:00pm PT
Saturday
DIY Robocars via Twitter
RT @a1k0n: ran a huge number of hyperparameter tuning experiments yesterday; now I can train a new policy, far with better quality, in 15 m…
Saturday
DIY Robocars via Twitter
RT @a1k0n: Did I get rid of hand-tuned parameters? Yes. Am I still hand-tuning more parameters? Also yes. I have a few knobs to address the…
Sep 26
DIY Robocars via Twitter
RT @a1k0n: I'm not going to spoil it, but (after charging the battery) this works way better than it has any right to. The car is now faste…
Sep 26
DIY Robocars via Twitter
RT @a1k0n: Decided to just see what happens if I run the sim-trained neural net on the car, with some safety rails around max throttle slew…
Sep 26
DIY Robocars via Twitter
Sep 24
DIY Robocars via Twitter
RT @SmallpixelCar: @a1k0n @diyrobocars I learned from this. This is my speed profile. Looks like I am too conservative on the right side of…
Sep 24
DIY Robocars via Twitter
RT @a1k0n: @SmallpixelCar @diyrobocars Dot color is speed; brighter is faster. Yeah, it has less room to explore in the tighter part, and t…
Sep 24
DIY Robocars via Twitter
RT @a1k0n: I'm gonna try to do proper offline reinforcement learning for @diyrobocars and throw away all my manual parameter tuning for the…
Sep 23
DIY Robocars via Twitter
RT @circuitlaunch: DIY Robocars & Brazilian BBQ - Sat 10/1. Our track combines hairpin curves with an intersection for max danger. Take tha…
Sep 22
DIY Robocars via Twitter
RT @SmallpixelCar: Had an great test today on @RAMS_RC_Club track. However the car starts to drift at 40mph. Some experts recommended to ch…
Sep 11
DIY Robocars via Twitter
RT @gclue_akira: 世界最速 チームtamiyaのaiカー https://t.co/1Qq2zOeftG
Sep 10
DIY Robocars via Twitter
RT @DanielChiaJH: Always a good time working on my @diyrobocars car at @circuitlaunch. Still got some work to do if I’m to beat @a1k0n howe…
Sep 10
DIY Robocars via Twitter
RT @SmallpixelCar: My new speed profile for @RAMS_RC_Club track https://t.co/RtLb7TcgIJ
Sep 10
More…