Ok i have been trying to get a few answer to finish my build and i am coming up completely empty.
I have a
4215(3507) 650KV Multicopter Brushless Motor
and a couple differ size props to test with. I have 30 amp esc and running 2 4s 5000mah batters to make 10000mah.
I cannot figure out what props to run to get a decent run time and a good lift value but still be under the amp and wattage rating. Here is what is said about the motor from vendor.
Volts | Amps | Watts | Thrust | |
APC 12x3.8SF | 11.96 | 13.85 | 165.6 | 1'25" |
APC 12x3.8SF | 15.6 | 22.1 | 341.6 | 3'9" |
APC 10x4.7SF | 12.01 | 9.55 | 114.1 | 1'10" |
APC 10x4.7SF | 15.6 | 14.75 | 230.1 | 2'9" |
Prop | Volts(V) | Amps(A) | Watts(W) | Thrust(g) | Efficiency (g/W) |
12×6E | 7.4 | 5.2 | 38.48 | 382 | 9.93 |
8.5 | 6.5 | 55.25 | 512 | 9.27 | |
10 | 8.6 | 86 | 716 | 8.33 | |
11.1 | 10 | 111 | 844 | 7.6 | |
12.8 | 12.5 | 160 | 1066 | 6.66 | |
13.5 | 13.6 | 183.6 | 1165 | 6.35 | |
14.8 | 15.7 | 232.36 | 1386 | 5.96 | |
13×8E | 7.4 | 9.2 | 68.08 | 607 | 8.92 |
8.5 | 11.2 | 95.2 | 747 | 7.85 | |
10 | 14 | 140 | 905 | 6.46 | |
11.1 | 16.5 | 183.15 | 1053 | 5.75 | |
14×7E | 7.4 | 7 | 51.8 | 552 | 10.66 |
8.5 | 8.6 | 73.1 | 701 | 9.59 | |
10 | 11.1 | 111 | 910 | 8.2 | |
11.1 | 13 | 144.3 | 1083 | 7.51 |
Replies
Weight is 2890 grams with both batteries and 2 gopro cameras.