Hey all

 Recently purchased a quadcopter with lots of Hobbyking componants. The kits is incomplete in build but I beleive everything I need is there.

My experience with RC are nitro airplanes so I probably seem a little inept.

Attached is a pic of the RX and FC board.(yeah I know upgrade soon)

The two wires Im touching are for the Flight Controller and RX?  If so I need what to complete.

Also Wiring..Everything goes from the RX to FC?  

I know I need to program the KK board Im just a little mixed up with sequence of wires.

FYI  Batt is 2200 20-30c

       motors are 2212  850KV

       esc are 30 amo

       total weight is 2.2 to 2.3 lbs

thanks in advance

Views: 50


Reply to This

© 2018   Created by Chris Anderson.   Powered by

Badges  |  Report an Issue  |  Terms of Service