I just finally gathered all the cash i need for my dream copter build. The purpose of this build is to gain a higher level of expertise in the small UAV field. I am going to document the build.
Would really appreciate a review of the parts and purchase destination of the parts. I need to know if there are more reliable products or websites to buy this stuff.
Here is the list:
| Power distribution board | order (2) $18 | |||||
| Thermal camera : | 400(Maybe in the future) | |||||
| Lidar Light: | $150 | https://www.sparkfun.com/products/14032 | ||||
| Optical flow & sonar: | $100 | https://www.ebay.com/i/282159615902?chn=ps&dispItem=1 | ||||
| Power sensor: | $33 | http://brushlessgimbal.ca/index.php?main_page=product_info&cPath=3&products_id=933 | ||||
| Transmitter Receiver: | $240 | |||||
| Flight controller/Telemetry/Radio/GPS: | $110 | |||||
| 40A ESC's Speed controller | (2 Orders for 8 total) $50 | |||||
| LD-MT2213 8 MOTORS: | (Order 2 for total of 8)$120 | |||||
| FPV TX RX: | $59.99 | |||||
| Gold Bullets: | (2 orders) $30 | |||||
| Companion PC: | $40 | https://www.adafruit.com/product/2358 | ||||
| battery 4S battery 7200mah: | $50 | https://hobbyking.com/en_us/turnigy-7200mah-4s-14-8v-40c-hardcase-pack.html | ||||
| Hexi-Frame | $100 | |||||
| Image Recognition Pixy camera | $75 | https://www.adafruit.com/product/1906 | ||||
| Props: | (Order 3)$44 | |||||
| FPV CAMERA | $80.00 | http://brushlessgimbal.ca/FPV/RunCam-Split-3-WiFi-Module | ||||
| Conan For 3DMapping | $99 | |||||
| STORM 32 BGC GIMBAL CONTROLLER | $33 | |||||
BGC GIMBAL 2 AXIS Gimbal | $165($85 on ebay) | https://www.ebay.com/i/132205642880?chn=ps&dispItem=1 | ||||
| POWER CONNETOR XT90 OR XT60, DEENS | (order 2) $10 | |||||
Replies