Discussions

Apm 2.0 cppm

Posted by lee nagle on March 10, 2012 at 9:52pm
Hi everyone, I have followed the instructions precicely but can't seem to get cppm to work? I have soldered the pad on the back and Ive tried various frsky rxs and can't get it to work?Any help would be appreciatedCheers Lee

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • lee nagle March 15, 2012 at 10:29pm
    One other thing how do I change the channel output for CPPM, because I use mode one and it seems to be outputting for mode two
  • lee nagle March 15, 2012 at 10:27pm
    The only way I got it to work is like another member said and that was using the apm1 method
  • virginijus.v March 15, 2012 at 3:30am

    Hello,

    I have the similar problem... I have soldered pads, connected rx ppm signal to channel 5 and nothing works. TX is Futaba F8G Super, RX - Frsky TFRSP http://robotbirds.com/catalog/product_info.php?products_id=6224. When pads not soldered and I connect another rx (not ppm) to individual channels everything works. 

This reply was deleted.

Activity