I have a fixed wing platform with APM 2.6 and I want to install a remote shutter trigger for a canon S 100 and airspeed indicator
The directions for each seem vague to me
The airspeed indicator, pitot static I bought is a Eagle Tree
#d Robotics is out of the product they sell
Does anyone have a wiring schematic for either of these additional inputs
Replies
Hi Paul
Does the canon S100 have infra red remote interface?
If so a simple infra red trigger plugged into pwm pin 10 will do it.
Like this one
http://www.infinity-hobby.com/main/product_info.php?cPath=198_228&a...
You then have to use Mission planner to do a bit of setup, just got it working myself
Can give you more info if you have the infrared port
Hi Phil
I do not have that remote interface you are referring to .I was hoping I could use my USB and not have it triggered by GPS location but by a half shutter press just like CHDK in manual mode
My problem is sometimes I have to land before my script is done and I am getting sick of replacing cameras due to lens error cause by landing with the lens open