APM Drone doesn't act the way i seen in videos.

It's taken me a long time (since feb) to finally get all the parts that were needed to build my APM drone. But yesterday i finally got it together and in the air the first day YAY!

I Followed videos on youtube how to calibrate the apm, and HK 30a UBEC speed controllers. The GPS connects very quickly (almost instantly) when outside. Yesterday i was flying it i flew it towards my peach trees (30 yards away). When it arrived at the location i tried the RTL function. When i did that it went full throttle and went straight up in the air!!!

Drone is Neewer flamewheel

APM 2.8

Ublox Neo-6M GPS

Turnigy iA6 Receiver 6CH 2.4G AFHDS 2A Receiver

Transmitter is the turnigy tgy-i6

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • After try RTL, test alt hold, if all works well, test loiter, if all work well, then try RTL but check what altitude RTL settings your  copter have, if you are flying lower, the copter is going to climb.

    First of all, read carefully first fly instructions http://copter.ardupilot.com/

    OSD is for FPV, telemetry is very usefull to connect with your computer, tablet or phone, try to install  http://copter.ardupilot.com/wiki/common-telemetry-landingpage/

  • It went full throttle? Or just started to climb up? Default RTL behavior is to climb up to desired height and only then navigate home.

  • Edit: There is more parts that came with the APM 2.8 kit.


    MAVLink-OSD V2.0 x1
    3DR Radio Telemetry Kit 915Mhz x1

    But didn't install them because from what i gathered it's only needed for FPV?

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ : A Home-brew computer club* for Connected Autonomous Driving. talk at #piandmore ⁦@PiAndMore⁩ on Jan 23rd h…
Saturday
DIY Robocars via Twitter
RT @a1k0n: New blog post! Deep dive into my ceiling light based localization algorithm which runs in 1ms on a Raspberry Pi 3: https://t.co/…
Saturday
DIY Robocars via Twitter
Great new guide to using @donkey_car https://custom-build-robots.com/donkey-car-e-book-en
Saturday
DIY Robocars via Twitter
RT @chr1sa: The next @DIYRobocars virtual AI race is tomorrow morn at 9:00am PT. You can watch live on Twitch https://www.meetup.com/DIYRobocars/events/275268196/
Friday
DIY Robocars via Twitter
New version of Intel OpenBot! This resolves many of the issues with the first version, including a much smoother tr… https://twitter.com/i/web/status/1352395636369313798
Thursday
DIY Drones via Twitter
Using ArduRover with an RTK GPS https://ift.tt/2N9I3RO
Jan 18
DIY Drones via Twitter
Jan 18
DIY Robocars via Twitter
Jan 18
DIY Robocars via Twitter
Jan 15
DIY Robocars via Twitter
Jan 15
DIY Drones via Twitter
Jan 14
DIY Robocars via Twitter
RT @Heavy02011: @diyrobocars : A Home-brew computer club* for Connected Autonomous Driving on Jan 23rd, 2021 https://www.meetup.com/Connected-Autonomous-Driving/events/275728684/ #Meetu…
Jan 14
DIY Robocars via Twitter
Jan 14
David Hori liked Isabella Domi's profile
Jan 12
DIY Robocars via Twitter
RT @Heavy02011: ⁦@diyrobocars⁩ Autonomous Driving Assembly at #rC3. join us at https://rc3.world/rc3/assembly/diyrobocars-f1tenth/ ⁦@f1tenth⁩ ⁦@DAVGtech⁩ ⁦@DWalmroth⁩…
Jan 11
DIY Robocars via Twitter
RT @chr1sa: New car designs coming for our next @DIYRobocars @donkey_car virtual race on the 23rd. Choose any one you want at race time Le…
Jan 11
More…