Discussions

APM esc calibration with joystick through Mission Planner

Posted by Mehmet Emin Örs on May 14, 2016 at 2:17am

Hello everyone,

I have trust brand joystick and I have no RC Transmitter it is very expensive. I want to calibrate and use my SingleCopter with joystick. If I won't use RC Transmitter is it a big problem in my flight Tests?

You need to be a member of diydrones to add comments!

Join diydrones

Tags: 28, apm, esc, joystick, mission, planner, calibration
Email me when people reply –
Follow

Replies

  • Alasdair May 15, 2016 at 6:46pm
    Mehmet, you should find it to be very good, I have one for my indoor flyers and a small plane. It is good for up to about 400 meters range and has very well designed programming interface with plenty of flexibility. Best of luck.
  • Alasdair May 14, 2016 at 4:44am

    You will probably need more than just a joystick, there needs to be some way of controlling your singlecopter if it is to be flown, and you are not aboard. There is no need to spend a lot on a transmitter, something like a FlySky FS-T6 can be purchased for around us$50, and it has a 6 channel receiver included, you can program expo's, curves, mixes and rates etc, extra receivers are under ten bucks. Upgrade when funds are available maybe.

    • Mehmet Emin Örs > Alasdair May 15, 2016 at 8:21am

      Thanks for your reply,

      I ordered FLYSKY rc transmitter. I hope it is gonna be well.

This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
Santiago Perez liked Santiago Perez's profile
Jun 21
More…