Hi,
I'm a first time APM user in Multicopter, but not arduplane. I'm having an strange problem here, I made almost all the hardware configurations required (but not compassmot) when I start the motors (without propellers) even if I keep the throttle at minimum it keeps going up and accelerating, I used acro or stabilize mode and the result is the same, doesn't matter the position of the throtlle, as soon as I let the stick in the place, it will go up... and if I change position it goes to the original throttle again.
What I'm doing wrong?
Thanks
Replies
Hello,
I have pretty the same issue with my hexacopter with APM 2.5 and last AC. The mottor keeps accelerating at the beginning even if throttle stick is at minimum position (all symptoms are the same as described above.
So, have you already found the solution or understood why this behaviour occurs?
Here goes the logs:
https://www.dropbox.com/s/dj2vaenew2q2ive/2013-08-19%2012-25%2010.log
https://www.dropbox.com/s/3n9y6t895ckwqj0/2013-08-19%2012-25%2011.log
Can someone take a look?
Hi, sorry for the delay. Here are the rlog and tlog with the "problem" (I don't know its a problem yet, its just strange)
https://www.dropbox.com/s/uleqrh6a72esvxx/2013-08-19%2011-47-12.rlog
https://www.dropbox.com/s/e50ccvk29st44mb/2013-08-19%2011-47-12.tlog
Please take a look and tell me whats wrong...
Its not the ESCs, they work perfectly on YS-X6 and they're Blue Series 40A with SimonK software, so no possible soft-start. Anyway, when I connect the ESC directly to Futaba they work as they should.
I've not had this issue before, not much help there. What ESCs are you using?