This is my first use of any type of autopilot so I am probably making some kind of rookie mistake. What my problem is that I put multi switch into stabilize mode the pitch response to airframe movement is backwards. I have been trying different ways to configure it on the radio setup page and can only get the problem to switch to a backwards roll response. Manual mode is fine and the stabilize setting responds to my rc input properly. Any help would be greatly appreciated. I know I am green and the problem is something simple , but we all gotta start somewhere right.
You need to be a member of diydrones to add comments!
Replies
Switched servo to APM2 wires and all is good with my world.