Hi Folks
I seem to have a unique problem
I'm running a EZUHF Rx on Arduplane 3.20 and want Link Quality and flight modes using PPM in from the RX
I had flight modes working fine on Channel 8 to the APM 2.5, have moved the mixes to Channel 5 and they are functioning as expected on the Tx and Radio calibration just don't change the flight modes
The wiki states to setup flight modes on Channel 5 but from memory this is only for Copters?
Apparently mininosd extra requires the Link info on channel 8 which of course nukes flight mode selection
How do I get around this?
Thanks in advance
Ross
Replies