Hi
I have two options for BEC,
1. 4.8V 3A BEC
2. 5V/6V 3A BEC
Which one is better option for Arducopter power supply?
Cheers
Kelvin
You need to be a member of diydrones to add comments!
This reply was deleted.
Hi
I have two options for BEC,
1. 4.8V 3A BEC
2. 5V/6V 3A BEC
Which one is better option for Arducopter power supply?
Cheers
Kelvin
You need to be a member of diydrones to add comments!
Replies
3A is definitely more than enought for a standard setup arducopter :)
Im running more for all the extra gear iv got.
Yeah, I think the 4.8V is just too low. You need 5V.
What kind of craft is this going on? Do you have servos? If this is just a quad with no servos, 3A is way more than enough. A fully loaded APM with all the bells and whistles on draws about 0.2A. And that's with the receiver too.
Personally, I like the variable voltage one, at least you can change the supply if needs be.
Besides if you have alot of stuff running off a 4.8v supply, I think the voltage might drop low enough to cause brown outs...
I think ;)