I'm running 2.7.1 (Mavlink 1.0) on an APM1.4.  Just turned on the MinimOSD with the 3DR (900mhz) radio at the same time.  The OSD comes up, but with no data (e.g. 0 degrees on the heading).  3DR radio works fine.  I left the TX line off the MinimOSD connector, as per the wiki.   This setup worked with Mavlink 0.9. 

As a test, I disconnected the 3DR radio connector and took the TX line out of the connector and put it in the MinimOSD connector and the OSD worked fine.

I'm wondering if the serial port oilpan driver cannot handle two loads??? 

Has anyone seen (or know about ) this issue??

 

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Just fgured this out and am posting in case someone else has the issue.  On an APM1 with both 3DR radio and MinimOSD connected all looks OK but no telemetry is displayed.  Here is my error in thinking and what I did to get it to work.

    You must first connect the 3DR radio with MP.  I can even power the APM from USB (APM1, rememeber), but I must connect MP and APM FIRST usng the 3DR radio.  Until I connect them, I see heartbeats but no telemetry.  Once MP and APM is connected via the 3DR radio, all works fine.  If I try to connect via USB, no telemetry.  But if I again connect via the 3DR radio, all works.  And one other thing - once I connect via the 3DR radio, I can disconnect MP and all continues to work.

    So to sum up, you must FIRST connect MP to APM via the 3DR radio to get the MinimOSD to display telemetry.

    At least, that worked for me. 

This reply was deleted.

Activity

DIY Robocars via Twitter
How to use the new @donkey_car graphical UI to edit driving data for better training https://www.youtube.com/watch?v=J5-zHNeNebQ
Monday
DIY Robocars via Twitter
RT @SmallpixelCar: Wrote a program to find the light positions at @circuitlaunch. Here is the hypothesis of the light locations updating ba…
Saturday
DIY Robocars via Twitter
RT @SmallpixelCar: Broke my @HokuyoUsa Lidar today. Luckily the non-cone localization, based on @a1k0n LightSLAM idea, works. It will help…
Nov 25
DIY Robocars via Twitter
@gclue_akira CC @NVIDIAEmbedded
Nov 23
DIY Robocars via Twitter
RT @luxonis: OAK-D PoE Autonomous Vehicle (Courtesy of zonyl in our Discord: https://discord.gg/EPsZHkg9Nx) https://t.co/PNDewvJdrb
Nov 23
DIY Robocars via Twitter
RT @f1tenth: It is getting dark and rainy on the F1TENTH racetrack in the @LGSVLSimulator. Testing out the new flood lights for the racetra…
Nov 23
DIY Robocars via Twitter
RT @JoeSpeeds: Live Now! Alex of @IndyAChallenge winning @TU_Muenchen team talking about their racing strategy and open source @OpenRobotic…
Nov 20
DIY Robocars via Twitter
RT @DAVGtech: Live NOW! Alexander Wischnewski of Indy Autonomous Challenge winning TUM team talking racing @diyrobocars @Heavy02011 @Ottawa…
Nov 20
DIY Robocars via Twitter
Incredible training performance with Donkeycar https://www.youtube.com/watch?v=9yy7ASttw04
Nov 9
DIY Robocars via Twitter
RT @JoeSpeeds: Sat Nov 6 Virtual DonkeyCar (and other cars, too) Race. So bring any car? @diyrobocars @IndyAChallenge https://t.co/nZQTff5…
Oct 31
DIY Robocars via Twitter
RT @JoeSpeeds: @chr1sa awesomely scary to see in person as our $1M robot almost clipped the walls as it spun at 140mph. But it was also awe…
Oct 29
DIY Robocars via Twitter
RT @chr1sa: Hey, @a1k0n's amazing "localize by the ceiling lights" @diyrobocars made @hackaday! It's consistently been the fastest in our…
Oct 25
DIY Robocars via Twitter
RT @IMS: It’s only fitting that @BostonDynamics Spot is waving the green flag for today’s @IndyAChallenge! Watch LIVE 👉 https://t.co/NtKnO…
Oct 23
DIY Robocars via Twitter
RT @IndyAChallenge: Congratulations to @TU_Muenchen the winners of the historic @IndyAChallenge and $1M. The first autonomous racecar comp…
Oct 23
DIY Robocars via Twitter
RT @JoeSpeeds: 🏎@TU_Muenchen #ROS 2 @EclipseCyclone #DDS #Zenoh 137mph. Saturday 10am EDT @IndyAChallenge @Twitch http://indyautonomouschallenge.com/stream
Oct 23
DIY Robocars via Twitter
RT @DAVGtech: Another incident: https://t.co/G1pTxQug6B
Oct 23
More…