I'm about to start building my first quad however I'm stuck as to which flight computer I should get and also which spectrum receiver I should use. I have a spectrum receiver for a plane setup but can I use this or can I purchase a satellite receiver to use on its own? It has the channels for motor, ailerons, rudder, gear etc. can this be wired for a drone with 4 motors?
You need to be a member of diydrones to add comments!
Just for info here is what I've gone for so far...
- LDPOWER MT3515-400KV Brushless Outrunner Motor
- 4pcs SimonK Firmware 2-3S 12A Brushless ESC with BEC for Quadcopter
- 500 Red & White Alien Multi-copter REPTILE 500mm Quadcopter Frame W / 450 / 550
- 10x7 prop
- 5000mah 3s 25c LiPo battery
As before just need an appropriate flight controller...
Replies
- LDPOWER MT3515-400KV Brushless Outrunner Motor
- 4pcs SimonK Firmware 2-3S 12A Brushless ESC with BEC for Quadcopter
- 500 Red & White Alien Multi-copter REPTILE 500mm Quadcopter Frame W / 450 / 550
- 10x7 prop
- 5000mah 3s 25c LiPo battery
As before just need an appropriate flight controller...