You need to be a member of diydrones to add comments!
This reply was deleted.
Activity
RT @chr1sa: After more than a year of only virtual races, @DIYRobocars returns to the newly renovated @circuitlaunch on May 22 for the resu…
RT @DAVGtech: And now available with LiDAR 🔥 https://twitter.com/Heavy02011/status/1381137016381964293
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #9 - #ParkingLotNerds #thunderhillracetrack, CA Join us for the next race April 24th,…
RT @DWalmroth: Weather's finally cooperating, looking forward to racing 1:10 scale autonomous cars outdoors again! @diyrobocars, @NVIDIAEm…
RT @AIDRI_: I finally succeeded in optimizing the trajectory and speed of a car on a #racetrack.
Next step: implement a 2d controller and…
@jetdillo @circuitlaunch Actually the second *in person* event in a year. We do virtual races every month
Update: we're moving it back one day to Sunday (the 4th) at 11:00am instead
@GrantEMoe @circuitlaunch Update: we're doing it on Sunday (4th) at 11:00am instead
RT @chr1sa: Maybe we should have a mini @DIYRobocars race in our lower school's playground https://t.co/xLFeua1R6X
If anybody wants to join us for an informal outdoors hack/race we're going to be meeting at the @CircuitLaunch park… https://twitter.com/i/web/status/1375907409223249923
RT @SmallpixelCar: Ready to reopen, innovation has to continue. Inside/outside, LiDAR/GPS, race/delivery https://t.co/jpmvttoHEd
RT @DAVGtech: By far best race yet! Congratulations to the winner @Heavy02011 🥇🏆🍾👏👏👏 @diyrobocars @donkey_car @NVIDIAEmbedded https://t.co/…
RT @Heavy02011: #VirtualRaceLeague: @DIYRobocars Race #8 - #ParkingLotNerds @DAVGtech @DWalmroth @OttawaAVGroup - join us tomorrow h…
RT @mrpollo: 11 years ago, the pxIMU was announced to the world on @DIYDrones, and it changed the life of many (mine included). The followi…
Replies
From Code:
1) A, B, C LED's blinking rapidly while waiting ESCs to bootup and initial shake to end from connecting battery
2) A, B, C LED's have running light while calibrating Gyro/Acc's
3) Green LED Solid after initialization finished
So only part 1 goes - but as have no esc's connected just running off USB. Then dont get to step two
I do a download - Aurduino is happy and says does download - both orange comms leds go ballistic for 20s and then,
ABC (Green Orange and Red) LEDs flash quickly for 5s then go off.
And thats it.
I open the serial port and nothing shows in the box - Andy commands .e.g."D" seem to have no affect, but I can see the oragne TX led coming on when I send a command.
I is likely to be a dud IMU or badly soldered (altho I was very careful)? The APM board seems fine (blinking blue, solid orange and red)
How can I get more diagnostics? I feel a bit in the dark....
have you accidentally uncommented the //IsXbee command?