Discussions

Connecting brushless motor with esc and battery and receiver ......

Posted by Mayank Gupta on February 13, 2011 at 7:02am

Friends i got esc and brushless motors ,battery

1.brushlessmotor 2826 700kv

2.18 amp esc

3.11.1 v LiPo battery

 

now the problem is that i dont where to connect which wire ,as the motor is consisting of three wires .please help me and post me some pictures of connection if possible........

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –
Follow

Replies

  • Mayank Gupta February 13, 2011 at 7:31am
    thanks a lot Mr. Christof Schmid.
  • Christof Schmid February 13, 2011 at 7:25am

    You should have 3 cables on one side of the esc and 2 cables (black & red) on the other side. Connect the motor with the 3 cables side. When you exchange 2 of them, the direction of the motor changes. Connect the other side of the esc (red = + and blk = -) with the batt. Make sure red on red and blk on blk. Ohterwise you fry the esc.  

    Best

    Christof

     

This reply was deleted.

Activity