I have been working on this a few weeks now. It is a BEC and R/C switch all in one that powers the servos, thus taking the current load of the servos off my APM.
Just wanted to share and maybe get some help on getting this to a single sided pcb
I included the schematic and the board layout.
The R/C has an adjustable regulator. The board has a 5v and 12v regulator for fpv and other equipment. There are jumper to bypass the switch function for channels 5 and 6 and have them pass through like channels 1 through 4.
Replies
I forgot to mention the schematic and the board are drawn up in eagle