DJI WK-H on Traditional Heli - X-Cell Spectra-G

I have recently purchased and built the Miniature Aircraft - Spectra G Gasser and the DJI - WK-H controller.

There seems to be very little info on the final configurations for the controller for various sizes/types helicopters especially the Spectra-g Gasser.

My Current Setup is as follows:

Here is my setup hardware:

  • Spectra-G 2012
  • Zenoah PUH 260
  • Hitec HS-5565 MH HV Servos (cyclic + throttle)
  • Futaba BLS256HV (tail)
  • DJI-WK-H controller
  • 720mm Rotortech Scott Gray Mains
  • 105mm Edge tail blades
  • Align T-rex 700 Flybar (600mm)
  • Align F3C Flybar Paddles
  • std carb
  • RJX Tuned Muffler
  • 13/93t gear ratio 7.15

  • GPS is positioned 68cm from the main shaft.
  • IMU is 19cm from main shaft.

  I will post some pictures when I have it all together.

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • So let the rebuild begin :)

    going to test motor today after opening and inspecting it, everything looks good to go.

  • Wow, sorry to hear that. What kind of flight controller was on it at the time?
  • Hi Guys,

    I'm putting the project on hold, helicopter was totally destroyed in a RX/TX lockout failure on this past sunday.

    i will update with my findings to the cause of the lockout, the failsafe never took over at that moment.

    even the gopro camera had stopped recording at the time of the failure.

  • Hi there, as you know i have my spectra G flying with a WKH, so i'll post some pics of my installation and also a copy of my .ace file so you can view my setup values.  I will get the Spectra G on the bench tonight to take the photos.

    As i remember those measurements are around the same as mine. 

This reply was deleted.

Activity

DIY Robocars via Twitter
May 15
DIY Robocars via Twitter
May 14
DIY Robocars via Twitter
May 13
DIY Robocars via Twitter
RT @f1tenth: Say hi to our newest #F1TENTH creation for @ieee_ras_icra next week in Philly. It’s going to be huge! 😎 🔥 @AutowareFdn @PennEn…
May 13
DIY Robocars via Twitter
May 11
DIY Robocars via Twitter
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Noticed my car zigzagged in last run. It turned out to be the grass stuck in the wheel and made the odometry less accura…
May 8
DIY Robocars via Twitter
RT @SmallpixelCar: Test my car. RTK GPS worked great. Thanks @emlid for their support. https://t.co/EkQ6qmjmWR
May 8
DIY Drones via Twitter
RT @chr1sa: @kane That's @diydrones circa 2009. Still have a box of those Canon cameras that we used to strap into planes, just like this.…
May 3
DIY Robocars via Twitter
RT @chr1sa: Our next @diyrobocars race is going to be outside at a real RC racetrack in Fremont on May 28. Fully autonomous racing, head-to…
Apr 30
DIY Robocars via Twitter
RT @f1tenth: Our Spring 2022 F1TENTH course @PennEngineers is coming to an end with a head-to-head race as a big finale. So proud of our st…
Apr 26
DIY Robocars via Twitter
RT @DanielChiaJH: I wrote a thing! Throughout the development of my @diyrobocars car I've been using @foxglovedev Studio to visualize and d…
Apr 23
DIY Robocars via Twitter
RT @SmallpixelCar: My new car for high speed. Low body, everything ( @NVIDIAEmbedded Jetson Xavier NX, @emlid RTK GPS, IMC) under the deck…
Apr 23
DIY Robocars via Twitter
Apr 21
DIY Robocars via Twitter
RT @f1tenth: F1TENTH Race training setup @PennEngineers for our upcoming ICRA2022 @ieee_ras_icra competition. @OpenRoboticsOrg @IndyAChalle…
Apr 21
DIY Robocars via Twitter
RT @fatcatFABLAB: Proud to be hosting a restarted DIY Robocars NYC Meetup April 26. Come by if you want to talk about and race self-driving…
Apr 17
More…