Engine Speed Problem

Hello. I'm trying to build a new f450 frame, pixhawk2.4.8 quad.

When I try to accelerate the motors there are only 3 speed levels.
Slow, Medium and Fast. There is no in between.
To explain in more detail, we gave power to the engines, they started to spin at idle, there is no change until we bring the speed bar to half, when the speed bar comes to half, the engines suddenly start spinning at medium speed, we constantly raise the speed bar still does not change, when the speed bar is at the top, it suddenly starts to spin at full throttle. Then we start to lower the speed bar, there is no change until it reaches medium speed, it continues to work at full throttle, when the bar comes to the middle, it suddenly drops to medium speed, then it comes to medium speed. at the bottom, it suddenly drops to idle speed, so I can only get 3 levels of speed.
The Remote Speed bar normally increments millimeter by millimeter in Radio Calibration in the Mission Planer program. But the motors only give me 3 speeds. What should I do so that the speed gradually increases and decreases gradually according to my bar movement? ,


Please Volume Up and Watch:

https://www.youtube.com/watch?v=oMytqhyfteo

 

https://www.youtube.com/watch?v=laGF8YSnU5o

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Are you considering starting a durable medical equipment (DME) company? With the DME market expected to surpass $76 billion by 2026, now is an excellent time to enter this rapidly growing industry. However, starting a DME company requires careful planning and adherence to strict regulations. This comprehensive guide will cover the essential steps to start a durable medical equipment business and position it for long-term success.

    https://nikohealth.com/how-to-start-a-durable-medical-equipment-bus...
    How to Start a Durable Medical Equipment Business - The Ultimate Guide
    Five common issues that start-up DME/HME companies often encounter when dealing with RCM solutions, plus some recommendations.
  • Over recent years, the healthcare industry has undergone a huge digital transformation due to the need to completely update its existing infrastructure. The pandemic and other factors — one of which is an increased desire for patients to take an active role in their own healthcare process — have accelerated the transition of offline medical services to digital, resulting in the need for secure, interoperable, and compliant software solutions. This is the perfect time for the healthcare tech industry, as there has never been such high demand for quality products as there is today.

    https://gloriumtech.com/healthcare-software-development-and-solutions/
    The Full Guide to Healthcare Software Development Services
    Learn about healthcare software development services with a focus on improving the quality of patient care, increasing efficiency, and optimizing ope…
  • ESC Calibration: Ensure that your electronic speed controllers (ESCs) are properly calibrated. This process will set the ESCs to recognize the minimum and maximum pulse widths sent from the throttle channel of your transmitter.
    Radio Calibration: Verify that the radio calibration is done correctly in the Mission Planner. Autodesk https://procadis.com/version/autodesk-inventor-professional-2024/ Inventor Professional 2024 price. The throttle channel should smoothly transition from 1000 (minimum) to 2000 (maximum) as you move the throttle stick.
    Firmware Settings: Check the firmware settings in the Pixhawk to ensure that there are no limits set on the throttle response that could be causing the three distinct speed levels.
    Buy and Download Autodesk Inventor Professional 2024 Online | ProCADIS Software Store
    Upgrade to Inventor Professional 2024 to unlock your full potential with expanded design tools, sophisticated simulation capabilities, and increased…
  • Any update? I am waiting for your reply and till then I will search for the RAJABAJI casino sister sites on the https://casinosanalyzer.com/online-casinos/rajabaji.com link. I want to earn money that is why I want to play online real money games through which I can make some money. If you also want to earn it then you can visit the given link.
  • Help me please
  • 3D Robotics
    Did you calibrate your ESCs?
This reply was deleted.

Activity

Neville Rodrigues liked Neville Rodrigues's profile
Jun 30
More…