Hey all

i have a problem with my graupner xr 16 ifs receiver. I had to replace my old receiver and now there is a problem with failsafe. When i unplug my receiver the channel 3 drops to 900 (the regular values are between 1103 and 1900) which should lead to fail safe. But when i switch of my radio (for simulating a connection loss) the level only drops to 1103. As this is also the lowest regular throttle value there won't be a failsafe. I know there is something like increasing the travel to 125 or 150 percent but i did never understand when to to this. Would this help with my issue and can someone explain how to do this (before or after remote calibration, before or after esc calibration etc)

thank you so much,

tm

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –

Replies

  • Hey all,

    i found the reason for my problem. For the ifs system you will need to teach the values as an extra step. Most other systems save the values while binding the tx/rx. It is documented in the receivers manual ....

    thanks! Andre

This reply was deleted.

Activity

DIY Robocars via Twitter
RT @IMS: It’s only fitting that @BostonDynamics Spot is waving the green flag for today’s @IndyAChallenge! Watch LIVE 👉 https://t.co/NtKnO…
yesterday
DIY Robocars via Twitter
RT @IndyAChallenge: Congratulations to @TU_Muenchen the winners of the historic @IndyAChallenge and $1M. The first autonomous racecar comp…
yesterday
DIY Robocars via Twitter
RT @JoeSpeeds: 🏎@TU_Muenchen #ROS 2 @EclipseCyclone #DDS #Zenoh 137mph. Saturday 10am EDT @IndyAChallenge @Twitch http://indyautonomouschallenge.com/stream
yesterday
DIY Robocars via Twitter
RT @DAVGtech: Another incident: https://t.co/G1pTxQug6B
yesterday
DIY Robocars via Twitter
RT @DAVGtech: What a great way to connect why @diyrobocars community is so valuable and important! Have to start somewhere @IndyAChallenge…
yesterday
DIY Robocars via Twitter
RT @DAVGtech: https://t.co/GwkbSBjdGa
yesterday
DIY Robocars via Twitter
RT @DAVGtech: Good morning from @IndyAChallenge at @IMS. It was a late night, but worth it. Come see for yourself how the pass ended and ch…
yesterday
DIY Robocars via Twitter
RT @circuitlaunch: Robot fun this Saturday (23) at Circuit Launch! From 10am to 4pm. Lots of robots, autonomous car racing training, tech t…
Friday
DIY Robocars via Twitter
RT @chr1sa: 10 of these autonomous racecars will be competing tomorrow at the Indianapolis raceway
Friday
DIY Robocars via Twitter
RT @a1k0n: Sync'd @joshu's GoPro w/ my datalogging; video is 2.5X speed, Google imagery upper-right. Found out my track boundaries are WAY…
Oct 18
DIY Robocars via Twitter
RT @a1k0n: Also, at 45mph, the front tires literally blow up like a balloon and it doesn't have much front traction, so the car becomes fai…
Oct 18
DIY Robocars via Twitter
RT @a1k0n: Okay, some datalogs! Green dots are precalculated racing line (from my crummy optimizer -- it veers to the middle after 2 for Re…
Oct 18
DIY Robocars via Twitter
RT @a1k0n: Welp my @selfracingcars entry, hastily conceived heading filter and all, actually worked! Heading home, datalogs and videos to f…
Oct 18
DIY Robocars via Twitter
Oct 18
DIY Robocars via Twitter
Oct 15
DIY Robocars via Twitter
RT @f1tenth: What can we learn from autonomous racing? Actually, a lot! To get an idea what you can do in this field and where the research…
Oct 11
More…