Discussions

Finally Up!

Posted by Craig Burden on January 5, 2011 at 1:48pm

I've been waiting for AGES, finally got all the parts and got it flying. Just trying to dial in the PID settings, very confused though about what each of them do exactly. Ive got it up by adjusting the P in Acro-mode. Can you guys let me know what they do. :) Also i saw something about "Gyro Smoothing" or something, what is this and where do i find it? Cause my readings are quiet jittery, it rotates as if it was out of trim but after trimming it still rotates a bit...

Dont know if you guys will be able to see these but its worth a try:

First Test fly (no PID's changed):
https://www.youtube.com/watch?v=6RJpgmgaLDM

A few later ( after changing the P alot):
https://www.youtube.com/watch?v=mr2JzPEERNM

You need to be a member of diydrones to add comments!

Join diydrones

first, help, test, flights

Email me when people reply –

Replies

Craig Burden January 6, 2011 at 2:49am

There we go they're up on youtube. links above
Craig Burden January 6, 2011 at 2:49am

I've been waiting for AGES, finally got all the parts and got it flying. Just trying to dial in the PID settings, very confused though about what each of them do exactly. Ive got it up by adjusting the P in Acro-mode. Can you guys let me know what they do. :) Also i saw something about "Gyro Smoothing" or something, what is this and where do i find it? Cause my readings are quiet jittery, it rotates as if it was out of trim but after trimming it still rotates a bit...

Dont know if you guys will be able to see these but its worth a try:

First Test fly (no PID's changed):
https://www.youtube.com/watch?v=6RJpgmgaLDM

A few later ( after changing the P alot):
https://www.youtube.com/watch?v=mr2JzPEERNM
Developer

Jason Short January 5, 2011 at 3:53pm

Videos are blocked. Sorry, I'm not your facebook friend...