Discussions

Hey all,

A friend of mine took some picture from a microflight plane. He asked me if it was possible to create a panorama from the pictures. I've tried the autopano software, IMCE, etc. but the results were not good enough (parallax errors, etc.).

Then I've tried Agisoft. Agisoft use a different approach (point cloud) and the model is far better. But I don't know how to create a panorama from this model. My model is too heavy to use it in a classic 3D software (terragen, blender, etc.).

So if you have any advice on how I could create  a good panorama, please help me :)

Regards,

Arnaud