Global hawk?

Hey guys,Im new to this site but not to the Radio control world. Ive been flying radio control planes for over 10 years and compete on a weekly basis in the south in both freestyle and IMAC competitions. I have vast knowledge of the radio world and can be of help to anyone that needs it that flys airplanes. Anyway...I saw that there is no real global hawk kit. Anyone interested in one? If so what size?I have CAD on my computer and am more than willing with alittle time to put together a design and talk to my laser cutter into building us some kits. I can build the kits in house for a small number of buyers.For where I fly ill be building a big plane. Thinking about 100" span, carbon fiber wing tube, electric ducted fan setup, with a 5s5000 mah pack(I have 4 from my large 3d planes). This will be a good start. I run only hitec and Jr equipment. I do not rub futaba. Some may but I grew up jr. My radio will be a jr 9303 2.4 ghz reciever.Im new to drones but not to rc planes and kit building.Let me see some interest and ill work some magic.My e-mail is if interested write me specs and tell me if your interested in this buildThanks,Willp.s. im attending embry riddle studing international security and aviation to build/fly drones

You need to be a member of diydrones to add comments!

Join diydrones

Email me when people reply –


  • Good morning folks!

    Will, we have not heard from you in some time. Everything ok?
  • Hey Will,

    How is it looking? Think you have enough interest? PPPPLLLLEEEESE!
  • I would be interested in a kit in the 100"-110" area. Probably to early to tell but a projected cost?
  • Yes, oh hell yes! I would pay for a good 80"-100" global hawk!

    You just let me know!
  • 100 inch is to big in my opinion , 80 inch is more reasonable.
  • Moderator
    I think less is more.

    To my mind the most successful designs will end up being sub 5kg perhaps sub 2.5kg.

    When regulations are better defined I think they will close the door on big stuff.

    But that said, 100inch Global Hawk would be cool!!
  • Chris,
    I saw that kit and also yours/someones post on it. Im very disapointed in the quality of the kit. Although when I go to singapore in a few weeks and ill stop by and check one out.

    I saw that nitro planes has a predator but since ive been in the hobby for so long I stay far away from nitro planes. Id much reither build my own.
  • 3D Robotics
    There's a foam kit you can buy with a ducted fan. It's not very big, however.
This reply was deleted.


DIY Robocars via Twitter
RT @chr1sa: You can see this in person in two weeks for our next live event with real cars. It's great fun for adults and kids alike, and…
DIY Robocars via Twitter
RT @chr1sa: The final race (1:24) at yesterday's @DIYRobcars virtual event was our best. It's only two minutes long but it has everything,…
DIY Robocars via Twitter
RT @chr1sa: The monthly @diyrobocars virtual race is starting now!
Mike Whitney liked Mike Whitney's profile
Jul 19
DIY Robocars via Twitter
Jul 2
DIY Robocars via Twitter
Jun 26
Abdulatif Tlaib liked Ryan's profile
Jun 24
DIY Robocars via Twitter
RT @SmallpixelCar: First time at @wsraceways. After tuning @HokuyoUsa lidar signal and camera sensor on @NVIDIAEmbedded, my car was able to…
Jun 20
DIY Robocars via Twitter
RT @breadcentric: The handy bit about racing with self-driving cars is that one can type while the car is racing. Report from #AWSDeepRacer…
Jun 18
DIY Robocars via Twitter
RT @chr1sa: Our Bay Area @DIYRobocars meetup is now at 2,700 members. Next in-person events (in Oakland) are training day on July 17 and…
Jun 18
DIY Robocars via Twitter
Videos from the ICRA autonomous racing workshop are now available:
Jun 10
DIY Robocars via Twitter
RT @SmallpixelCar: Prepared race track for Warm Spring Raceways @wsraceways and looking forward to test my new car at RAMS RC @ramsaicar fa…
Jun 6
DIY Robocars via Twitter
RT @f1tenth: Trying out some nasty blocking maneuvers 🏎️🤖 #f1tenth #autonomousracing
Jun 5
DIY Robocars via Twitter
May 27
DIY Robocars via Twitter
RT @araffin2: I will talk this Saturday from 18:00 to 19:00 Paris time for the @diyrobocars community about learning to race in hours using…
May 27
DIY Robocars via Twitter
RT @a1k0n: Luckily the infeasible hairpin problem was easily reproducible in simulation and I could test the fix before bringing the car ba…
May 26